Home How to view these pages in your browsers
Easier to Read Pro-107 Scanner
and iScan Software Manual
Last Updated March 06, 2016

Click here to buy a printed, bound, formatted in color, copy of this manual from Scanner Master

Contents
Intro/Review Copy Programming To/From SD Card
Main Features Scanning
Scanning Terminology   Turning Play Lists On/Off
Understanding Object Oriented Memory   Skipping Objects
  Understanding Play Lists   Restore Skipped Objects
Understanding Trunking   Storing CTCSS/DCS Codes
  Understanding Multi-Site Trunking   Using Pause
Understanding IDs   Monitoring Objects
Understanding Receive Modes   Using the Attenuator
  Understanding CTCSS/DCS   Priority Scanning
Band Coverage/Default Steps   Optimizing Scanning Parameters
Turning on the Scanner and Setting the Squelch Searching
Navigating the Scanner Menus   Public Safety, Air, or Ham Search
A Look at the Keypad   Search Group Charts
A Look at the Display   Marine, CB, Rail, or FRS/GRMS/MURS Search
Installing the iScan Software   Marine, CB, Rail, and FRS/GRMS/MURS Channels
Updating...   Limit Search
  Software   Signal Stalker Search
  Firmware   Special Signal Stalker
  Library   Stalker Search Bands
  Existing Channels   Zeromatic Tuning
 

Copy Library to SD Card

 

Unlocking Search Frequencies

iScan Software Menus

Weather Settings

 

 

Weather Radio

Settings Menu

 

Skywarn List

 

General Settings Tab

 

Weather Priority

Planning Systems and Play Lists

 

SAME Standby Mode

Naming Play Lists

 

Event Codes

Importing Objects...

Reformatting the SD Card

 

Using Browse Library

Flash Programming

 

Using the Library Import Tab

Firmware/CPU/Library/Software Version

 

Using a Text File or the Clipboard

Charging the Batteries

Programming Trunked Systems/Sites

Related Links

Program/Edit Frequencies and Talkgroup IDs

Pre-Set Fleet Maps

 

Edit Object Menus

 

Intro/Review Contents
This is Radio Shack's introduction to the "simple" scanner made for people with limited programming knowledge. The menus are fairly simple but not all self explanatory. We now have unlimited memory available on a SD card along with the RadioReference Data Base for the US (only). Like the PSR500/310, the PSR700 uses Object Oriented Memory for storing channels but still has only 21 play lists. It comes with free software required for uploading/downloading and for updating the firmware or database.

The incomplete menus, lack of a full keypad, and the absence of many key features from the 500/310 models turn a lot of people away.
The scanner is really made for the 'set it and forget it' type of user. While you can edit objects and import from the library with just the scanner, there are some things you can't do with the scanner and have to do with the software including program/edit single frequencies, set receive mode, set/pre-store CTCSS/DCS tones/codes (you can store on the fly), set delay time, toggle audioBoost, update the scanner firmware, and then programming and settings of all trunking systems and sites. And then oddly, all the searching/Signal Stalker options can only be set in the scanner, there are no settings for those in the software.

There are quite a few settings that are dependent on other settings and make it confusing for even experienced users. Example: one setting for alerts on, another for the alert volume, and then another for the object to use an alert, all in different places in the menus. Attenuation is another setting that is in multiple menus (global, system, site, object) that has to be carefully checked.


There are quite a few things that just don't make sense. Anytime you want to do a quick edit for a channel, i.e. attenuate, lockout, set priority, the scanner spends too much time re-writing to the SD card. Then you have just the manual on CD, no printed manual. Seems a bit ridiculous that you need to have a PC (and what about MAC users?) to fully program or edit a hand-held (i.e. mobile) scanner. One big drawback is you have to remove the SD card (and the batteries to get to it) and use a card reader to upload or download any information. The only thing the USB cable does is update the firmware or charge the batteries. Again, two steps forward, three steps back.

Because only a few settings/options are available in the scanner itself, this manual will also explain how to use the iScan software which is required
for any custom programming. Purple text will refer to scanner instructions and Green text will refer to Software instructions to make it easier to find steps with the scanner or software. Blue will pertain to both. The manual that comes with the scanner is still poorly organized IMHO. This manual should make it easier for most people to use the features of the radio as I will try to explain procedures a little more clearly and in a more logical order. And, thanks to the many people who have posted their valuable insight on the Radio Reference forums and Yahoo groups.

An overview of the features can also be viewed at my
Trunking Radio Comparison Chart page.

There are better antennas out there to use than the one that comes with the scanner. RS has the Center-Loaded Telescoping Whip for $15 - better for VHF/UHF. The 800MHz Scanner Antenna for $25 - 100% better for 700+ MHz but keep your stock rubber duck handy for areas with a lot of 800MHz overload. You may be able to find others on the web but RS is convenient so you can buy it and take it back in the same day if you don't like it. Read the reviews for each at the site.

For those of you who are new to trunking or haven't had a scanner in the last 10 years it is a good idea to read the respective sections on those topics. You really have to know how trunking works in order to program a trunking system. It won't do you any good to try to program a trunking system unless you know what the radio needs and is going to do with the data (control channel, IDs, LCN order, etc.).

I will assume you know how to obtain the basic information from the original manual such as following safety procedures, putting the batteries in, connecting the antenna, etc. as I will concentrate on the operation and main functions of the scanner.

I hereby absolve myself from anything that happens to anyone or the scanner as a result of the information you will be reading. You are welcome to copy and/or print these pages and use them in the scanning hobby as long as you don't change, redistribute, or charge/accept money for them. I have tried the best I can to make sure everything is accurate here but if I missed a step, you see something that's obviously wrong, or have any other information you would like to contribute to make this manual better for everyone, please email me.

Check back often as this document will be updated and revised from time to time.

Main Features Contents
Multi-System Trunking - you can track Motorola, GE/Ericsson (EDACS), and LTR trunking systems including VHF, UHF, 380, and 700MHz systems.

Simplified Keypad and Display - with familiar Play, Pause, Skip and navigation controls make it easy for you to use your scanner.

Multi-Site Trunking - allows you to scan systems covering a very large geographic area that use multiple antenna sites and operate on different frequencies but use the same Talk Group IDs.
Object Oriented Memory - Each frequency or talkgroup is programmed as an object. Like Dynamic Memory, you use only the amount of memory you need. Total memory is limited only by the SD card.
21 Play Lists - 20 lists to program, use, and select like traditional banks allowing you to arrange, group and scan objects according to your preference with an additional 'Skywarn' list.

Programmable Radio/Private IDs - allows you to program radio (unit) IDs and private IDs for conventional and trunked objects.

Audible Alarms - programmable audible alerts can be configured when certain objects are active.
Signal Stalker - quickly sweeps the scanner's frequency ranges for transmissions from nearby sources.
Simultaneous Trunktrack and Scan  - scans conventional and trunked frequencies together at the same time.
AudioBoost (software only) - available for conventional frequencies, IDs, and trunked systems, boosts the audio levels slightly louder.
Priority Scan - the scanner will sample conventional objects for activity periodically while scanning and monitoring other objects. The scanner will also give IDs priority over other IDs while checking a particular trunking system for activity.
LTR Home Repeater AutoMove - enter the LTR system frequencies in any order, and the scanner will automatically move the frequencies to the proper home repeater slots as transmissions are received on the system.
CTCSS/DCS Tone Decode - Provides fast and reliable decoding of subaudible squelch signaling with squelch tail elimination.

SAME and All Hazards Weather Alerting - can be set to automatically sound the alarm tone to advise of hazardous weather conditions when it detects the alert signal on the local NOAA weather channel (SAME standby mode) or you can scan and set the weather channel as a priority channel.

Control Channel Only Scanning - automatically determines the trunking frequencies for Motorola trunking systems once the control channels are programmed.
FlexStep - allows you to enter a frequency in any 1.250 kHz step.
Backlit Keypad and Display - you select one or the other or both to light (or not), when you press the light button, on any key press (function ignore), or on any key press with that key's function.
Real-time Signal Strength Meter - shows relative strength of received signals with customizable thresholds.
Skip or Lockout - lets you skip or permanently lockout any programmed object. All skipped objects can be restored (unskipped).
Scan/Search/Trunking Delay - variable delay (software only; 0 to 60 seconds) before searching for another object so you can hear more replies that are made on the same object.
16 Character, 4-line, Dot Matrix Text Display - lets you program a text label for each object so you can easily identify the transmission.
7 Service Search Bands - Marine, CB, FRS/GMRS/MURS, Police/Fire, Air, Ham, and Railroad ranges to monitor interesting frequencies more quickly.
250 Search Lockouts - allow you lockout up to 250 frequencies (total) from the service, limit, and Signal Stalker searches.
Attenuation - lets you program your scanner (per object or globally) to reduce the scanner's sensitivity to strong local signals or noise caused by these signals to reduce interference.
Scan, Search Speed - scans up to 65 channels per second and searches up to 80 steps per second.
Low Battery Alert - with adjustable volume and alert times.
Four Power Options - lets you power the scanner using alkaline, Ni-Cad, or NiMH internal batteries, USB power using the included transfer cable, or external power using an optional AC or DC USB adapter.
Key Confirmation Tones - the scanner sounds a tone when you press a key, perform an operation correctly, and an error tone if you make an error with adjustable volume level.

Scanning Terminology Contents
Scanning- the process of stepping through programmed conventional objects in play lists.
Searching- the process of searching for frequencies in pre-programmed service searches, Signal Stalker bands, and the limit search.
Pause Mode- used for monitor single objects or frequencies.
Update Mode- used for updating firmware, the library (database), and uploading/downloading to/from scanner using a computer.

Understanding Object Orientated Memory Contents
First we had 'Dynamic Memory' to get used to and now we have 'Object Oriented Memory' to figure out. Memory organization is nothing more than a large collection of scannable objects assigned to play lists. A scannable 'object' is any frequency or ID. Trunking systems and sites are configuration objects that are used to scan ID objects. Trunking systems/sites are not assigned to play lists because you don't scan a trunking system/site; you monitor the IDs it generates. You only have to program any object once, then it can be scanned from any list(s) it is assigned to. Like Dynamic Memory, you use only the amount of memory you need. Unlike Dynamic Memory, you don't have to 'build' systems or groups first to program them. They are 'created as you go'. Also, there is no limit (except total memory) to the number of conventional systems, IDs, or conventional channels for each list.

Each scannable object can be assigned to one or more of the main lists (1-20) or the '
Skywarn List' (21). Each list is scanned like a traditional bank. The main lists can be scanned with any other list but when the 'Skywarn List' is selected, only objects in that list will be scanned and no other lists.

Understanding Trunking Contents
Trunking systems let a large group of 2-way radio users (or even different groups of 2-way radio users) efficiently use a set of frequencies. Instead of selecting a specific frequency for a transmission, the user’s radio selects a programmed trunking bank in the system when that user presses their PTT (push to talk) button. The trunking system automatically transmits the call on the first available frequency, and also sends (on a different frequency called a Data or Control channel) a code that uniquely identifies that transmission as a talkgroup ID (or just ID). So when you are trunktracking a system, you are listening to active IDs transmitting in the system (each using the first available frequency in the system). Trunking systems in general allocate and use fewer frequencies among many different users.

Since the trunking system might send a call and its response on different frequencies, it is difficult to listen to trunked communications using a conventional scanner. These scanners let you monitor the control channel frequency so you can hear calls and responses for users and more easily "follow" conversations than with a conventional scanner.

This trunking scanner trunktrack the following types of systems:
  • Motorola Type I
  • Motorola Type II
  • Motorola Type IIi Hybrid
  • Motorola Type II Smartnet
  • Motorola Type II Smartzone
  • Motorola Type II Smartzone Omnilink
  • EDACS Standard (Wide)
  • EDACS Narrowband (Narrow)
  • EDACS Networked (Wide/Narrow)
  • EDACS SCAT
  • EDACS ESK (not ProVoice)
  • LTR Standard
When you program Motorola frequencies into the scanner, one frequency is the control (or data) channel, and the rest are voice frequencies shared by all the users. There may be 3 or 4 frequencies assigned as (primary or alternate) control channels but only one control channel will be active at a time. These scanners will allow you to program just the Motorola control channels into the trunking system and the voice channels will automatically be found. EDACS systems need all the frequencies for the system programmed and in the correct LCN (Logical Channel Number) order.

The control channel is continually transmitted to the field units and has a sound similar to listening to a boat engine over the phone (in manual mode; you won't hear this when you are trunking the system). This control channel is also a good check to see if you can trunktrack the system. If you can't hear a control channel when you step through the trunking frequencies (in manual mode), you either don't have all the frequencies or are too far away to receive the control channel and the system.
Motorola systems are limited to a maximum of 28 frequencies per system, Ericsson EDACS systems are limited to 25 frequencies per system.

LTR systems work a little differently.
This type of system encodes all trunking information as digital subaudible data that accompanies each transmission. LTR systems typically do not have a dedicated control channel. The frequencies also have to be in LCN (Logical Channel Number) order or the correct 'slot' for the system to trunktrack properly. These radios have a 'Auto Move' feature that allows you to enter the frequencies in any order in the scanner will position the frequencies in the proper 'slot' base on the received subaudible data. Each repeater has its own controller, and all of these controllers are synchronized together. Even though each controller monitors its own channel, one of the channel controllers is assigned to be a master that all controllers report to. Each of these controllers sends out a data burst approximately every 10 seconds so that the subscriber units know that the system is there. This data burst is not sent at the same time by all the channels, but happens randomly throughout all the system channels. If you listen to the frequencies of an LTR system in manual mode (not trunking), on every channel in the system you will hear this data burst that will sound like a short blip of static like someone keyed up and unkeyed a radio within about 500 ms. LTR systems are limited to 20 frequencies per system.

Trunkscanning is basically scanning IDs that are programmed into ID locations (same concept as frequencies into channels). You can then trunkscan just the programmed IDs. Trunktracking is searching for all IDs in a system (same concept as searching for frequencies in a band).

Understanding Multi-Site Trunking
Some Motorola and EDACS systems covering a very large geographic area use multiple antenna sites that each operate on different frequencies and use the same talkgroup IDs for traffic. Each site will have its own set of trunking frequencies and is monitored like a single system. All talkgroups in the system are available to every site so they don't have to be reprogrammed for each site. Each talkgroup object can be assigned to one or more play lists but only assigned to one trunking system.

 
Radio Reference.com has an excellent page explaining the various types of trunking systems in more detail here.

Understanding IDs Contents
ID Formats  
Motorola IDs come in two formats: Type I and Type II. Each format displays and uses Talk Group IDs in slightly different ways. Type I/II hybrid systems use both Type I and Type II formats for Talk Group IDs.
 
Type I IDs are in the format FFF-SS where FFF is the fleet and SS is the sub-fleet. Type I systems are usually organized with different IDs assigned to different fleets. For example, a valid fleet/subfleet ID identifying all detectives within a police department might be 000-12, where 000 identifies all police IDs and 12 identifies the Detective division. To properly trunk a Type I system, you have to program the fleet map for the system.
Type II IDs are identified by a 5-digit number. Valid (programmable) Talk Group IDs are divisible by 16.
 
EDACS IDs come in two formats: AFS (Agency-Fleet-Subfleet) and Decimal.
 
AFS IDs are in the form AA-FFS where AA is the agency, FF is the fleet, and S is the sub-fleet. EDACS systems are organized with different IDs assigned to different fleets and agencies. For example, a valid agency/fleet/subfleet ID identifying all detectives within a police department in an agency might be 06-101, where 06 identifies the agency (Police), 10 identifies the Police division (East side), and 1 identifies the Detective division.
Decimal IDs are shown as a decimal number from 0 to 2047.
You can find a chart showing Decimal and AFS equivalents here: Conversion Chart.
 
LTR IDs are in the format A-HH-UUU where A is the area code (0 or 1), HH is the home repeater (01-20), and UUU is the user ID (000-254).
 
ID Types
Group Wildcard IDs will monitor all talkgroup IDs on the trunked radio system. A wildcard TGRP object allows you to receive IDs that are not already stored as objects in the radio's memory.
Group IDs will only monitor talkgroup radio traffic on that specified TGID.
Private Wildcard IDs will monitor all private IDs on the trunked radio system.
Private IDs will only monitor private radio traffic on that specified private TGID.
Radio IDs are group or private IDs associated with individual radios.

Understanding Receive Modes Contents
Each conventional channel can have its own receive mode: Auto, AM, FM, or NFM.
Auto - Receives transmissions in the modulation sent. AM - Receives transmissions in AM modulation.
FM - Receives transmissions in FM modulation. NFM - Receives transmissions in NFM modulation.
 
Understanding CTCSS/DCS
Each conventional channel can have its own squelch mode: None, CTCSS, DCS, or Search.
None no codes will be searched.
CTCSS - PL codes appear (if received) in the format xxx.x, where xxx.x is a frequency in Hz.
DCS - DPL codes appear (if received) in the format xxx, where xxx is an octal code.
Search - the scanner will search and display any codes (if received).
 
Continuous Tone Coded Squelch System (CTCSS) and Digital Coded Squelch (DCS) are two methods used to prevent interference by other radio communications. Your scanner can receive transmissions that use these codes (or sometimes referred to as tones).

Coded squelch techniques involve the transmission of a special 'code' signal along with the audio of a radio transmission. A receiver with coded squelch only activates when the received signal has the correct 'code'. This lets many users share a single frequency, and decreases interference caused by distant transmitters on the same channel. In all major metropolitan areas of the United States, every available radio channel is assigned to more than one user. Public safety radio systems on the same frequency are usually set up at a distance of 40 miles apart, or more. This means that you may hear transmissions from a distant system when your local system is not transmitting. By programming the code (or tone) for a local channel the scanner will not stop on transmissions from the distant system.

With few exceptions, such as the VHF Aircraft and Marine bands, almost every other VHF or UHF radio system uses some form of coded squelch. By far, CTCSS is the most popular mode among non-trunked systems. Usually, but not always, VHF channels will use CTCSS and UHF channels will use DCS.

For more information visit Radio Reference's respective pages on
CTCSS and DCS.

Default Step Chart Contents
Frequency Range *Default Step (kHz) Mode Band Frequency Range *Default Step (kHz) Mode Band
25-26.960 10 AM VHF Lo Band 161.600-161.975 5 FM Remote Broadcast-Maritime
26.965-27.405 10 AM CB 162-174 12.5 FM Government Band
27.410-29.505 5 AM VHF Lo 216.0025-219.9975 5 FM Maritime
29.510-29.700 5 FM 10m Ham 220-224.995 5 FM 1.25m Ham-General Trunked
29.710-49.830 10 FM VHF Lo Band 225-379.99375 25 AM Military Air
49.835-54 5 FM 6m Ham 380-419.9875 12.5 FM Military Trunked
108-136.9916 8.33 AM Civilian Air 420-450 5 FM 70cm Ham
137-137.995 5 FM Satellite 450.00625-469.99375 6.25 FM Public Safety-Business
138-143.9875 12.5 FM Government 470-512 6.25 FM UHF TV
144-147.995 5 FM 2m Ham 764-781.996875 3.125 FM Trunked Public Safety
148-150.7875 12.5 FM Government-Satellite 791-796.996875 3.125 FM Trunked Public Safety
150.800-150.845 5 FM Auto Emergency 806-823.9875 12.5 FM Mobile Trunked Public Safety
150.8525-154.4975 7.5 FM Fire-Business 849-868.9875 12.5 FM Base Trunked Public Safety
154.515-154.640 5 FM Industry 894-939.9875 12.5 FM 33cm Ham-Business Trunked
154.650-156.045 7.5 FM Police 940-960 6.25 FM Government-Broadcast
156.050-157.450 7.5 FM Maritime 1240-1300 6.25 FM 23cm Ham-Government
157.470-161.5725 7.5 FM Police-Business-Rail  
This is what I got with FlexStep 'Off.
*Flexstep (in the 'Settings' menu) will allow step increments of 1.25 kHz.

Contents
 
Turning On The Scanner And Setting the Squelch
Make sure the scanner's antenna is connected before you turn it on.
Press on hold the power button
for about 1 second.
Set the squelch to the recommended setting.

The scanner is equipped with a Main Power Off switch which is located on the left hand side of the scanner underneath a protective cover. The Main Power Off switch can be used if desired to prevent battery drain when the scanner is not used for long periods of time. Always use the front panel key to turn the scanner off. Using the main power switch to turn the scanner off or removing the batteries without first turning the unit off via the key may result in lost data or corrupted memory on the SD Card.

Navigating the Scanner Menus

Contents
  Press or to select each main menu item.
Press or SEL to select a menu item.
Use or to
scroll through the menus. Press and hold or to scroll faster.
To exit most menus (with no SEL, Skip, or Menu options) press 
(or Menu if doesn't work first).
If you try to exit the menu without saving your changes, the scanner will prompt you to save changes?
Press SEL(Yes), or Skip(No).
 
Basic Settings
  You may want to change some settings right away to help you program your scanner a little easier. At least it helped me.
From the main menu press to scroll and select Settings then press or SEL to enter the Settings menu.
Press to scroll and select Simply Display then press or SEL to see all information in the display.
Press to scroll and select Beep Vol then press or to adjust a comfortable beep volume.
Press to scroll and select Contrast then press or to adjust a comfortable contrast level.
Press to scroll and select LMode then press or to select On.
Press Menu to exit and SEL to save the changes.
 
Sub Menus
  For each mode, scan, Signal Stalker, service search, limit search, and weather, there is a sub menu accessed by pressing the Menu button in each mode.
Pressing Menu in scan mode will return to the main menu.
Pressing Menu in scan receive mode will show the object menu for the object being received.
Pressing Menu in any search mode will show the search menu.
Pressing Menu in weather mode will show the weather menu.

The first few lines of each sub-menu will show:
Main Menu
Back
Save Changes
Default Values

If you are receiving a frequency or ID and press Menu you may also see:
Store Channel- in any search mode.

Store Wildcard in scan mode if a Wildcard ID is found in a trunked system.

Store sq code
-
in scan mode if a CTCSS/DCS tone/code is found for a conventional object.
 
To Browse Objects:
  From the main menu, press to scroll and select 'Browse Objects' then press or SEL.
Pressing or will scroll through the play lists.
Pressing or
will scroll through objects in each play list.

When you enter a menu, use or to scroll to the setting you wish to change.
Pressing and holding or will scroll faster. The scanner will double beep at the beginning of each play list.
The active setting has a next to it.

A Look at the Keypad Contents
Key Function
(Power) press and hold to turn on/off scanner.
press to toggle the backlight on or off.
MENU selects the main menu in scan mode.
selects the object menu in scan receive, pause, or browse objects modes.
selects the service/Stalker/limit menu in service/Stalker/limit search modes.
selects the Library Import menu in Browse Library mode.
selects the weather menu in weather scan mode.
exits top-level sub-menus to the main menu.
(Left) resumes/changes to searching down in search modes.
steps backward through frequencies in search pause mode.
navigates out of a menu or selection.
scrolls down play lists when browsing objects.
(Right)

resumes scanning in receiving or pause modes.
resumes/changes to searching up in search modes.
steps forward through frequencies in search pause mode.
navigates into a menu or selection.
scrolls up play lists when browsing objects.
toggles check box in Setting menu.
allows you to rename play lists in the play list menu.

, (Volume Up,
Scroll Up)
increases the volume when scanning or monitoring objects.
scrolls up through a menu.
scrolls up through objects in a play list when browsing.
, (Volume Down,
Scroll Down)
decreases the volume when scanning or monitoring objects.
scrolls down through a menu.
scrolls down through objects in a play list when browsing.
Skip toggles weather standby mode in weather scan mode.
toggles skip in receiving, browse object, and pause modes.
key clears all text at and to the right of the cursor when editing text.
/ SEL
(Play,Pause,Select)
select/execute options in menus.
pauses on object in scan mode.
pauses on search frequency in search mode.
(Weather) Enters weather scan mode from any mode.
selects SkyWarn List in weather scan or standby modes.

A Look at the Display Contents
Scan Mode

SCAN appears with the play lists scrolling (if more than 5) below.

 appears when the scanner is receiving a trunking control channel frequency.
 appears when global attenuation is off for all objects/searches.
 appears when global attenuation is on for all objects/searches.
 appears when attenuation is on for the scanned object/system/search.
 scrolls to show scan mode.
 appears solid when the batteries are fully charged.
 appears to show external power and the scanner is not (or done) charging or the Battery Type Selection switch is set to ALK.
Scan Receiving/Pause/Browse Modes

Top Row

 appears when the squelch circuit is open.

 appears to show the signal strength of the voice channel.
 blinks when the scanner is receiving a trunking control channel frequency.
 appears when global attenuation is off for all objects/systems/searches.
 appears when global attenuation is on for all objects/systems/searches.
 appears when attenuation is on for the displayed object/search.
FM, AM, or NF appears to show the received Modulation for a conventional or search object.
 appears to show scan mode.
 appears to show pause mode.
 appears solid when the batteries are fully charged.
1st Line

Contents

shows the Play List Name.

2nd Line

the Object Type appears as TGRP (Talkgroup), or CONV (Conventional). (simple display off).
shows Channel: for a conventional object or Group: for a talkgroup object. (simply display on).
p (not set for priority) or P (set for priority) appears to show the Priority Status of the talkgroup or conventional object.
s (not skipped) or S (skipped) appears to show the Skip Status of the object/search frequency.
d (delay off) or D (delay on) appears to show the Delay Status of the object/search.

3rd Line

shows the Text Tag for a conventional or talkgroup object and (with simple display off) will alternate with TGID.
 

4th Line

shows the Receive Mode for a conventional object. (simple display off).
shows the Frequency for a conventional object. (simple display off).
shows the System Name for a trunked system and (with simple display off) will alternate with Site Name.
 

5th Line

shows the Squelch Type for a conventional object. (simple display off).
shows the Tone/Code received for a conventional object. shows SRCH if no code/tone received. (simple display off).
S appears if the tone/code is found in search mode. (simple display off).
shows the VC/CC for a talkgroup object (if Radio ID is disabled). (simple display off).
shows the Radio ID for a talkgroup object if received and enabled. (simple display off).
shows the Radio ID Text Tag (only if enabled) for a talkgroup object. (simple display off).

Installing the iScan Software Contents
Insert the iScan software installation disk that came with the scanner. Computers with autoplay enabled will start the installation wizard automatically. If the installation doesn't start, open windows explorer and navigate to your CD drive and double-click iScanCD.exe.
Follow the prompts to finish the installation and select the "Complete" setup option.

Updating... Contents
Update the Software
  In the iScan software, click the Updates menu then Check for Software Update. Follow the prompts to finish the update.
 
Update the CPU Firmware
  In the iScan software, click the Updates menu then Check for CPU Firmware Update. Follow the prompts to finish the update.
 
Update the Library (Database) in the Software
  The database is updated every week on Mondays. In the iScan software, click the Updates menu then Check for Library Update. Follow the prompts to finish the update. You will also have the options to copy the database to the SD card (follow the prompts) and/or update objects in the software.

 

Update Existing Channels in the Software This will allow you to update all objects imported using an older version of the database with the current database in the software. You will have the options to replace the object names with updated object names (replacing all custom object names) and to import primary and alternate control channels (replacing all existing channels) for Motorola systems.

 

From the Library Import tab click the Update Channels button.
Click to select replace channel name checkbox.
Click to select import primary and alternate control channels for Motorola systems checkbox.
Press the
Update Channels button then Done when finished.

 
Copy the Library (Database) to the SD Card
  If you have updated your existing channels or did not use the 'copy database to scanner' option when you updated the library, you can do it with this step.
In the iScan software, click the SD Card menu then Copy Library to SD Card. Follow the prompts to finish the update.

iScan Software Menus (for the current 1.06 version) Contents
File Menu
  New Configuration opens a new, empty default configuration.
Exit
saves all configurations and exits the program.
SD Card Menu
  Copy Configuration To SD Card allows you to copy to the SD card.
Copy Configuration From SD Card
allows you to copy from the SD card.
Copy Library To SD Card
allows you to copy the database to the SD card.
Prepare SD Card for use
allows you to format the SD card.
Optimize SD Card
will copy files from the scanner to the computer, optimize the data, then copy the files back to the SD card.
Updates Menu
  Check for CPU Firmware Update
Check for Library Update
Check for Software Update
Configure Proxy Server
If you need to configure a proxy server to access the internet.
Advanced Menu
  Allows you to show/hide the programming tabs and start the software in full-screen mode.
Show Conventional Frequencies Tab
Show Trunked Radio Systems Tab
Start Full Screen
Remember Position and Size on Exit Will remember window size if Start Full Screen is unchecked.
Help Menu
  Allows you to access the help file, various support links, and the software version (select About).

Settings Menu Contents
The Settings menu allows you to change the radio-wide settings used by the scanner. The default settings will work fine for most users but you will probably want to personalize the radio to suit your individual needs.
Note: Not all setting are not available in both the scanner and the software.


To
Edit Settings in the Scanner
, from the main menu press or to scroll to 'Settings' then press SEL or .
Use or to select the Settings in the menu. Changes do not take effect until the menu is saved. Press Menu to save.
 
Scanner Menu...
Volume Settings Priority Time Beep Vol LiteArea Blink Time 2
Default Vals G Atten Mode Alert Vol LiteTime Show Radio ID
Simple Display G Atten On Contrast Welcome Text 1-5 PC/IF CCDump
Priority Mode Key Beeps LiteMode Blink Time 1 Low Batt Time
 
To Edit Settings in the iScan Software select the General Settings tab.
 
General Settings Tab...
Welcome Text Display Settings Scanlist Control Priority Settings Trunking Options
Volume Settings   Display Mode   Alpha Tag   Priority Mode   Talkgroup ID Mode
Backlight Settings   Blink Time 1   Enabled, Default   Priority Interval   Use Radio ID Alarm
  Mode   Blink Time 2 Restore Factory Defaults Attenuation Settings   Radio ID Display Mode
  Area   Contrast Clear Search Lockouts   Attenuation Mode Flexible Frequency Entry
  Timeout Sound Settings Alert Settings   Global Attenuation On/Off  
      Mode   Mode    
      Key Beep   Volume    
    Key Volume   Low Battery Time    
 
Updates Menu...
Configure Proxy Server        

Volume Settings Controls the speaker and headphone volume in the scanner. Default is 20.

Contents

  Speaker
  Scanner Press or to select Mute, 1-30, or Max.
  Software General Settings > Volume Settings > Speaker- Mute, 1-30, or Max.
  Headphone (Software only)
  General Settings > Volume Settings > Headphone- Mute, 1-30, or Max.
 
Default Vals/Restore Factory Defaults Resets all settings to their default values except the welcome message.
  Scanner Press SEL or to reset.
  Software General Settings - Restore Factory Defaults (button).
 
Clear Search Lockouts (Software only) (does not work for me). See also Unlocking Search Frequencies.
  General Settings- Clear Search Lockouts (button).
 
Simple Display/Display Mode This option must be unchecked/advanced to view detailed frequency, talkgroup ID, Radio ID, and CTCSS/DCS squelch code information. Simple display only shows object and play list names. Default is Simple.
  Scanner- Press SEL or to check (Simple), or uncheck (Advance).
  Software General Settings > Display Settings > Display Mode- Advance or Simple.
 
Scanlist Control Sets the default play list. New objects created in the software are assigned to the default play list. Objects stored in service, limit, and Signal Stalker modes are automatically saved to the default play list. Default is 1.
  General Settings > Scanlist Control.
  Alpha Tag Click to select and highlight the play list name to edit.
Enabled Click to enable each play list.
Default Click to select the default play list.
 
Priority Mode Objects with Priority enabled will be sampled according to the Priority Time setting for activity. Priority mode works by periodically sampling objects for activity which briefly interrupts transmissions on conventional systems. Priority IDs are sampled only between transmissions and only while monitoring each trunked system that contains the ID. Default is Off. See also Priority Scanning.
  Scanner Press SEL or to check On, or uncheck Off.
  Software General Settings > Priority Settings > Priority Mode- On or Off.
 
Priority Time/Priority Interval Sets (in .1 seconds) how frequently conventional objects are sampled. Default is 20 (2 secs).
  Scanner Press SEL or to edit. Enter the amount of time, 10 - 250 (1 - 25 secs).
Press or to select the first digit, then to move the cursor and repeat as needed.
Press SEL to save and exit.
  Software General Settings > Priority Settings > Priority Interval- 1-25 (seconds).
 
G Atten Mode/Attenuation Mode Sets the global attenuator mode. Global applies attenuation (on or off) to all objects only when Global Attenuation is set to On. Normal follows the individual object attenuator settings. 'G' will appear in the middle of the display when set to Global. See chart below. Default is Global. See also System Attenuation, Site Attenuation, and (conventional) Object Attenuation.
  Scanner Press SEL or to check (Global), or uncheck (Normal).
  Software General Settings > Attenuation Settings > Attenuation Mode- Normal or Global.
 
G Atten On/Global Attenuation On/Off Sets global attenuation (on or off) to every object regardless of the object attenuation setting. Indicators will appear in the middle of the display to indicate attenuation status. Default is Off. See chart below.
  Scanner Press SEL or to check On, or uncheck Off.
  Software General Settings > Attenuation Settings > Global Attenuation On/Off- On or Off.
  Attenuation Settings    
  Object Attenuation G Atten Mode G Atten On Center Display

Results

  Off Normal Off No G or A Object/system/search attenuation Off
  On Normal Off A Object/system/search attenuation On
  On or Off Global Off G Attenuation Off- all objects/systems/searches
  On or Off Global On GA Attenuation On- all objects/systems/searches
 
Sound Settings-Mode (Software only) Controls all beep and alert sounds used by the scanner. Default is On.
  General Settings > Sound Settings > Mode- On or Stealth.
 
Alert Settings-Mode (Software only) Controls audible and visual alerts used by the scanner. When set to Audio, only audio alerts will be used. When set to Visual, only visual alerts (Flash) will be used. Default is Both. Note: Sounds must also be On for audio alerts.
  General Settings > Alert Settings > Mode- Both, Audio, Visual, or Off.
 
Key Beeps/Key Beep Enables or disables key beep sounds. Default is On. Note: Sounds must also be On.
  Scanner Press SEL or to check On, or uncheck Off.
Software General Settings > Sound Settings > Key Beep- On or Off.
 
Beep Vol/Key Volume Controls the volume of key beep sounds. Default is 15. Note: Sounds must also be On.
  Scanner Press or to select Mute, 1-30, or Max.
  Software General Settings > Sound Settings > Key Volume- Mute, 1-30, or Max.
 
Alert Vol/Alert Settings-Volume Controls the volume of object alert sounds when Alerts is set to Audio or Both. Default is 15. Note: Sounds must also be On.
  Scanner Press or to select Mute, 1-30, or Max.
  Software General Settings > Alert Settings > Volume- Mute, 1-30, or Max.
 
Contrast
  Scanner Press or to select the best contrast. Default is 12.
  Software General Settings > Display Settings > Contrast- 0-20.
 
LiteMode/Backlight Settings-Mode Controls how the backlight operates. Default is Key/Key Press.
Note: see also
Backlight Mode/Light for object backlight settings.
  On - backlight is always on.
Stlth - backlight is always off.
Norml -
backlight turns on when the power key is pressed for the amount of time set in LiteTime.
Key/Key Press - backlight turns on when any key is pressed (and used) for the amount of time set in LiteTime.
Ignor -
works like 'Key' but the key's normal function is ignored for the first press. Pressing any key again (when the light is on) will activate that key's function.
Scanner Press or to select On, Stlth, Norml, Key, or Ignor.
Software General Settings > Backlight Settings > Mode- On, Stealth, Normal, Key Press, or Ignore First Key Press.
 
LiteArea/Backlight Settings-Area Controls what is lighted. Default is Both.
  Both - lights the display and keypad.
LCD -
lights the display only.
Keybd -
lights the keypad only.
Scanner Press or to select Both, LCD, or Keybd.
Software General Settings > Backlight Settings > Area- Both, LCD, or Keys.
Contents
LiteTime/Timeout Controls the amount of time the LiteArea stays on when LiteMode is set to Key/Key Press, Ignor, or Norml. Default is 5.
  Scanner Press SEL or to edit. Enter the number of seconds, 1 - 99.
Press or to select the first digit, then to move the cursor and select the second digit.
Press SEL to save and exit.
  Software General Settings > Backlight Settings > Timeout- 1-99.
 
Welcome Text 1-5/Welcome Text Allows you to text up to five lines of the display to be shown when the scanner is turned on.
  Scanner Press SEL or to edit.
Press or to select the character, then to move the cursor and repeat for up to 16 characters.
Press SEL to save and exit.
  Software General Settings > Welcome Text.
 
Blink Time 1 For alternating text displays, sets the display time (in .1 seconds) for the primary display element. (control channel, ID number, trunked site name). Default is .75 (3/4 sec.).
Blink Time 2 For alternating text displays, sets the display time (in .1 seconds) for the secondary display element. (voice channel, ID name, trunked system name). Default is .75 (3/4 sec.).
  Scanner Press SEL or to edit. Enter the amount of time, 1 - 250 (.1 - 2.5 secs).
Press or to select the first digit, then to move the cursor and select the second digit, then to move the cursor and select the third digit.
Press SEL to save and exit.
  Software General Settings > Display Settings > Blink Time 1,2-.1 - 2.5.
 
PC/IF CCDump (Scanner only) When enabled, the scanner streams control channel data over the USB interface when the radio is tuned to a trunking control channel. Default is Off.
  Press SEL or to check On, or uncheck Off.
 
Low Batt Time/Low Battery Time Sets the number of seconds between low battery warning alerts. The radio will shut down automatically to prevent corruption of the SD card when the battery level is critically low. Default is 30. Note: Sounds must also be On and Alerts must be set to Audio or Both.
  Scanner Press SEL or to edit. Enter the number of seconds, 0-60.
Press or to select the first digit, then to move the cursor and select the second digit.
Press SEL to save and exit.
  Software General Settings > Alert Settings > Low Battery Time- 0-60.
Contents
Talkgroup ID Mode (Software only) Sets the display format for talkgroup IDs. Default is Normal (DEC for Motorola, AFS for EDACS). Simple Display must be off.
  General Settings > Trunking Options > Talkgroup ID Mode- Normal, DEC, or HEX.
 
Use Radio ID Alarm (Software only) Uses the visual and/or audible alert settings with radio IDs. Default is Off. Note: Sounds must also be On and Alerts must be set to Audio, Visual, or Both.
General Settings > Trunking Options > Use Radio ID Alarm- Off or On.
 
Radio ID Display Mode (Software only) If set to On will display the radio ID name (if programmed).  If set to Off will display the radio ID number. Simple Display must be off. Default is Off.
General Settings > Trunking Options > Radio ID Display Mode- Off or On.
 
Flexible frequency entry-Flex Step (Software only) When checked allows you to enter a frequency down to any 1250 Hz (1.25 kHz - .00125) step (except in the civil air band 108-136 where the step size is fixed at 8.333 kHz), otherwise the scanner will use the default steps. Default is Off.
General Settings > Flexible frequency entry > Flex Step- Off or On.
 
Configure Proxy Server Allows you to configure a proxy server if you need to one to access the internet.

Planning Systems and Play Lists Contents
Play Lists
Each object (not trunking systems/sites) can be assigned to one or more of the 20 main lists or the '
Skywarn List' (21). Each list is scanned like a traditional bank. You can put any type of object in any list with any other object. Conventional and talkgroup objects can all go in the same list. The main lists, 1-20, can be scanned with any other list but selecting the 'Skywarn List' (21) will only scan objects in the SkyWarn list and no other lists. You can put as many objects in each of these 21 lists that memory allows.

Play lists are your way of organizing your selected objects, so you should give some thought as to how you want to your scanner organized. You may wish to group your objects into play lists according to the type of use, for example, Police, Fire, Racing, etc. Or, you may wish to group objects by into play lists according to geographical area, such as separate play lists for different counties or cities, or even separate play lists for different police and fire districts inside of a given county or city. You can even do both - use one play list for the police and fire channels for an entire county, and use other play lists for the areas of interest within the county, or for special situations.


The scanner is designed to be programmed by 'play list'. Once you set the Default Play List, when you create any objects in the software or import any with the scanner, they are, by default, assigned to this list.
Also, any search/Signal Stalker frequencies stored with 'Store Channel' will be saved to the default play list.

Multi-Site Systems
Some Motorola and EDACS systems covering a very large geographic area use multiple antenna sites that each operate on different frequencies and use the same talkgroup IDs for traffic. Each site will have its own set of trunking frequencies and is monitored like a single system. All talkgroups in the system are available to every site so they don't have to be reprogrammed for each site. Each talkgroup object can be assigned to one or more play lists but only assigned to one trunking system.

Naming Play Lists Contents
Naming Play Lists
  Scanner From the main menu, press to select Playlists then press . Press or to select the play list then press to edit.
Press or to select the first character, then to move the cursor and repeat for each character.
Press SEL to save and exit. Press Menu or to return to the main menu.
Software Click the General Settings tab then scroll in the Scanlist Control area to select the list number and click in the Alpha Tag field to highlight and edit.

Importing Objects  
Import Using Browse Library Import Using the Library Import Tab Import from Text File/Clipboard

Import Using Browse Library Contents
This is another quick way to add objects to the scanner by state and then by Agencies, Counties, and Systems. At least one site must be selected for a trunked system along with any individual talkgroup objects. If you don't know which site to select, you can select all sites, or even the entire system, and the scanner will automatically find and use the best available site.

As you browse the library and pick objects for importing, all selected objects will be imported into the play list or group of play lists that you select when you execute the import operation.
These play lists are not automatically enabled for scanning. You will have to enable them with the Playlists selection in the main menu after the import operation.

For counties and independent cities, there will typically be three options to choose from: Agencies, Categories, and Systems. The association of objects with each of these groups depends a lot on how the RadioReference volunteers decide to group the information they submitted to the RadioReference database. You can lookup your county in the RadioReference Data Base to see what is available and match headings in the database with the headings in the scanner (i.e. municipalities and districts, agencies, etc.).
Agencies will usually have businesses, airports, railroads, utilities, Military, recreation and attractions, retail, media, authorities, and other state-wide government or non-governmental agencies.
Categories will usually have colleges, schools, amateur radio, transportation, government and public safety agencies for municipalities and districts.
Systems will usually have state, county, or city trunked radio systems.


Picking an entire Agency, Category, or System may result in a very large number of objects being imported to the play lists. It is suggest that you drill into each grouping that you want to import to see the objects that are beneath it, and only select the entire grouping if you know that you want to monitor everything that it contains.

Checkbox codes are displayed instead of a checkbox to indicate when systems or frequencies are not compatible with the scanner. When one of these codes is shown instead of a checkbox, you cannot to select that checkbox. A D in place of a checkbox indicates that the object or system uses an unsupported digital modulation mode and cannot be scanned by the scanner.
An S in place of a checkbox indicates that the system type is not supported.
An F in place of a checkbox indicates that there are no sites or frequencies in the RadioReference database for the system or category.

The Default Play List is always selected. If you do not want to import your selected objects into the Default Play List, be sure to unselect it before importing. You can change the Default Play List only with the iScan software.

 

Contents

  To Import Using Browse Library, basically drill down through the menus to check items. Some menus may be empty with no selection available. Menus that have a lot of objects in them will load and import slower. You can navigate back () at anytime to change/add to you selections before you press Menu to import all selections.
From the main menu
press
or and scroll to 'Browse Library' and press SEL or .
Scroll to your state and press SEL or . To select Nationwide entities scroll to (Nationwide). At 'Data Types' scroll to 'Agencies', 'Counties/Cities', or 'Systems' and press SEL or .
 

 

Agencies: At 'Select Agency in State' press or to scroll to the agency type and press SEL or .
At 'Categories in Agency' p
ress or to scroll to the category and press SEL or .
At 'Subcategories in Category' p
ress or to scroll to the subcategory and press SEL or .
To select all frequencies in the subcategory press SEL to check the subcategory. Press
to navigate back and select more objects or press Menu to Import Selections.
To select specific frequencies in the subcategory press . At 'Frequencies in Subcategory' p
ress or to scroll to the frequency and press SEL to check the frequency. Press to navigate back and select more objects or Menu to import.
 
  Counties/Cities: (there is no city selection) At 'Select County' press or to scroll to the first letter of your county (or just press SEL for all) and press SEL or .
At 'Data Types' scroll to 'Agencies', 'Categories', or 'Systems' and press SEL or .
  Agencies: At 'Select Agency in County' press or to scroll to the agency and press SEL or .
At 'Categories in Agency' p
ress or to scroll to the category and press SEL or .
At 'Subcategories in Category' p
ress or to scroll to the subcategory and press SEL or .
To select all frequencies in the subcategory press SEL to check the subcategory.
Press
to navigate back and select more objects or press Menu to Import Selections.
To select specific frequencies in the subcategory press . At 'Frequencies in Subcategory' p
ress or to scroll to the frequency and press SEL to check the frequency.
Press
to navigate back and select more objects or press Menu to Import Selections.
  Categories: At 'Categories in County' press or to scroll to the category and press SEL or .
At 'Subcategories in Category' p
ress or to scroll to the subcategory and press SEL or .
To select all frequencies in the subcategory press SEL to check the subcategory.
Press
to navigate back and select more objects or press Menu to Import Selections.
To select specific frequencies in the subcategory press . At 'Frequencies in Subcategory' p
ress or to scroll to the frequency and press SEL to check the frequency.
Press
to navigate back and select more objects or press Menu to Import Selections.
  Systems: At 'Select System in County' press or to scroll to the system.
To select all sites, categories, and talkgroups in the system press SEL to check the system.
Press
to navigate back and select more objects or press Menu to Import Selections.
To select specific sites, categories, or talkgroups in the system press . At 'System Sites and Categories' p
ress or to scroll to 'Sites', or 'Categories'.
  Sites: To select all sites in the system press SEL to check Sites.
To select specific sites in the system press . You must select at least one site.
At 'System Sites' p
ress or to scroll to the site and press SEL to check the site.
  Press to navigate back and scroll to select Categories.
  Categories: To select all categories and talkgroups in the system press SEL to check Categories.
To select specific
categories or talkgroups in the system press .
 At 'Categories in System' p
ress or to scroll to the category.
  Talkgroups: To select all talkgroups in the category press SEL to check the category.
To select specific talkgroups in the category press .
At 'Talkgroups in Category' p
ress or to scroll to the talkgroup and press SEL to check the talkgroup.
Press
to navigate back and scroll to select another category.
Press to navigate back and select more objects or press Menu to Import Selections.
 

Contents

  Systems: At 'Select System in State' press or to scroll to the system and press SEL or .
To select all sites, categories, and talkgroups in the system press SEL to check the system. Press
to navigate back and select more objects or press Menu to Import Selections.
To select specific sites, categories, or talkgroups in the system press . At 'System Sites and Categories' p
ress or to scroll to 'Sites', or 'Categories'.
  Sites: To select all sites in the system press SEL to check Sites.
To select specific sites in the system press .
At 'System Sites' p
ress or to scroll to the site and press SEL to check the site.
  Press to navigate back and scroll to select Categories.
  Categories: To select all categories and talkgroups in the system press SEL to check Categories.
To select specific
categories or talkgroups in the system press .
 At 'Categories in System' p
ress or to scroll to the category.
  Talkgroups: To select all talkgroups in the category press SEL to check the category.
To select specific talkgroups in the category press .
At 'Talkgroups in Category' p
ress or to scroll to the talkgroup and press SEL to check the talkgroup.
Press
to navigate back and scroll to select another category. Press to navigate back and select more objects or Menu to import.
 
  Import Selections To import selections you have made browsing the library, press Menu. Press SEL or to Import Selected or scroll to Back or Main Menu.
At 'Playlists for chosen objects' p
ress or to scroll to each play list you want to import the objects into and press SEL to select the play list (don't forget the Default Play List is always selected).
Press
 to import or press Menu again then SEL to Import Now.
Note: Importing objects into play lists this way will not automatically enabled them for scanning. See Turning Play Lists On/Off.
 
Import Using the Library Import Tab Contents
This feature imports objects into the software only. You will still have to copy the configuration to the scanner.

The import option lets you select a state, and then state agencies, counties (agencies, categories, and systems), and state systems. The import option in the software is basically the same function as 'Browse Library' in the scanner.

You can also update
any existing objects in the software from an older version of the database with the current database version using the Update Channels button.
 
  To Import Using Library Import Some selections may be empty with no objects available
 
  Scroll and click to select a state or (Nationwide).
Select Agencies, Counties/Cities, or Systems and click the Next button.
  Agencies: Scroll to and click the Agency. Note: the instructions state 'then click the Next button to continue' but the software may continue automatically.
Scroll to and click each Category. The sub category list will then be filled in below.
To select all objects in the sub category, scroll to and click the sub category checkbox.
To select specific objects in the sub category, scroll to and click the sub category Name.
Scroll to and click each Object checkbox to select objects. Use the Select All and De-select All buttons as desired.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
 
  Counties/Cities: Scroll to and click the County. (There are no city selections).
Select a county then Agencies, Categories, or Systems and click the Next button.
  Agencies: Scroll to and click each Agency. Note: the instructions state 'then click the Next button to continue' but the software may continue automatically.
Scroll to and click each Category. The sub category list will then be filled in below.
To select all objects in the sub category, scroll to and click each sub category checkbox.
To select specific objects in the sub category, scroll to and click each sub category Name.
Scroll to and click each Object checkbox to select objects. Use the Select All and De-select All buttons as desired.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
  Categories: Scroll to and click each Category. The sub category list will then be filled in below.
To select all objects in the sub category, scroll to and click the sub category checkbox.
To select specific objects in the sub category, scroll to and click the sub category Name.
Scroll to and click each Object checkbox to select objects. Use the Select All and De-select All buttons as desired.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
  Systems: To select all sites and all talkgroups for each system, scroll to and click the system checkbox.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
To select specific sites or specific talkgroups for each system, scroll to and click the system Name. Click the Sites button to select sites or the Talkgroups button to select talkgroups.
  Sites: Scroll to and click the Site checkbox to select sites. Use the Select All and Clear All buttons as desired.
  Press the Back button then the Talkgroups button to select talkgroups.
  Talkgroups: Use the Select All and Clear All buttons to add talkgroup categories as desired.
To select all talkgroups
for each category,
scroll to and click the talkgroup category checkbox. The talkgroup listings will then be filled in below.
To select specific talkgroups for each category, scroll to and click the sub category Name. The talkgroup listings will then be filled in below.
Scroll to and click the Talkgroup checkbox to select talkgroups.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
 

Contents

  Systems: To select all sites and all talkgroups for each system, scroll to and click the system checkbox.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
To select specific sites or specific talkgroups for each system, scroll to and click the system Name. Click the Sites button to select sites or the Talkgroups button to select talkgroups.
  Sites: Scroll to and click the Site checkbox to select sites. Use the Select All and Clear All buttons as desired.
  Press the Back button then the Talkgroups button to select talkgroups.
  Talkgroups: Use the Select All and Clear All buttons to add talkgroup categories as desired.
To select all talkgroups
for each category,
scroll to and click the talkgroup category checkbox. The talkgroup listings will then be filled in below.
To select specific talkgroups for each category, scroll to and click the sub category Name. The talkgroup listings will then be filled in below.
Scroll to and click the Talkgroup checkbox to select talkgroups.
Press the Back button as desired to add more objects or Import Selected Channels to finish. Press the Clear All Selections button to start over.
 
Import from Text File/Clipboard Allows you to quickly import multiple frequencies and talkgroups from Notepad or any other file like Excel or Word. This feature imports objects into the software only. You will still have to copy the configuration to the scanner.

When the 'Import from Text File' or 'Import from Clipboard' button is pressed, the iScan software will show a listing of all channels that have been read from the file or clipboard. Across the top of the listing you will find headings for each column. The software will make an attempt to select the correct columns for the frequency, delay, attenuation, and lockout fields. All other columns will have a default heading in the form of "Column #" where # is the column number. To change the assignment for a column, click on the column heading. A pull down list will be provided that will allow you to select the data types supported by the software. Only those data types that have not been assigned to another column will be available in the list. To unassign a column, select the 'No Field' option.

When importing, all channels are imported into the default scanlist and will be added to the end of the existing channels. The scanlist memberships may be adjusted by selecting the channels you wish to change, and then clicking on the scanlist column of one of the selected channels.

Programming Trunking Systems/Sites (Software only) Contents
You can't program or edit trunking systems with the scanner, only the software. There is a 32 control channel limit for a trunking site. Each talkgroup ID can be assigned to more than one play list but can only be associated with one system.

To Program/Edit Trunking Systems select the Trunked Radio Systems tab. Not all tabs are visible by default. See Advanced Menu.
 
Trunking System Options...
New (button) Duplicate (button) Type Att  
Delete (button) Alpha Tag L/O ABst  
 
Site Details Tab...
New (button) L/O Site Frequencies Tab Site Options Tab (Motorola) Site Options Tab (EDACS, LTR)
Delete (button) Att   Frequency   Trunking Tables   Control Channel Type (EDACS)
Alpha Tag Multi-Site Settings (Motorola, EDACS only)   L/O   Type I/IIi Fleetmaps   Narrow Signal Type (EDACS)
    Data Decode Thresholds   Mode       Automatically adjust home repeaters (LTR)

Trunking System Options...
New (System) (button) Allows you to create a new (default) trunked system.
 
Delete (System) (button) Will delete the selected trunked system(s), sites, and all talkgroups.
 
Duplicate (System) (button) Will create a copy of all settings, sites, talkgroups, and radio IDs of the selected system.
 
Alpha Tag (System) Will allow you to name the system with up to 16 characters.
  Click to select the System then click to highlight the name and edit.
 
Type Allows you to select the system type, Motorola, EDACS, or LTR.
  Click to select the System then click Type to select from the drop-down menu.
 
L/O (System) Allows you to lockout the system so it won't be scanned. Default is Off.
  Click to select the System then click the L/O checkbox.
 
Att (System) Allows you to attenuate all sites or specific sites in the system (20 dB?).  Useful in areas where interference from nearby strong signals is present. Default is Off. See also Site Attenuation.
Note: Global Attenuation Mode must be set to Normal for this setting to apply.
  Click to select the System then click Att to select from the drop-down menu.
Off - no sites are attenuated.
Global - all sites are attenuated.
Per Site - uses site attenuation setting.
 

Contents

ABst (Audioboost) (System) Boosts the audio slightly (6 dB?) for the system. Default is Off. See also Object ABst.
  Click to select the System then click the ABst checkbox.
 
Site Details Tab...
New (Site) (button) Allows you to create a new site for the trunked system.
  Click to select the System then click the Site Details tab and click the New button.
 
Delete (Site) (button) Will delete the site and all talkgroups.
  Click to select the System then click the Site Details tab and click the Delete button.
 
Alpha Tag (Site) Will allow you to name the site with up to 16 characters.
  Click to select the System then click the Site Details tab, click the Site to select, and click to highlight the name and edit.
 
L/O (Site) Allows you to lockout the site so it won't be scanned. Default is Off.
  Click to select the System then click the Site Details tab, click the Site to select, and click the L/O checkbox.
 
Att (Site) Allows you to attenuate the site. See also System Attenuation.
Note: Global Attenuation Mode must be set to Normal for this setting to apply.
  Click to select the System then click the Site Details tab, click the Site to select, and click the Att checkbox.
 

Contents

Data Decode Thresholds Used with multi-site systems. Sets how the scanner follows the control channels you have programmed into multiple sites. While (you are) moving, the scanner will attempt to lock on the best control channel it can find. The scanner will always attempt to lock on to control channels where the decoding quality is greater than 'Threshold Hi', and will search for new control channels when the decoding quality of a control channel drops below 'Threshold Lo'. If no control channels are available that meet the Threshold Hi criteria, the scanner will seek the best control channel to use, and continue checking periodically for a new control channel that meets the Threshold Hi criteria. See also Optimizing Scanning Parameters.
  Threshold Lo Sets the control channel decode % threshold for a site to be considered out of range, which will begin the process of looking for a new site (control channel). Default is 75.
Threshold Hi
Sets the control channel decode % threshold for a site to be considered good when looking for a new site (control channel). Default is 95.
Click to select the System then click the Site Details tab, click the Site to select, then the up/down arrows to select. Use the Apply to all Sites button as desired.
 
Frequency (Site Frequencies) For Motorola systems you only need to enter the control channel frequencies. Note: EDACSs frequencies also have to be entered in LCN order. See Finding EDACS LCN Order.
See also Flexstep setting for step size defaults.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Frequencies tab, then click to highlight the frequency and edit.
 
L/O (Site Frequencies) Allows you to lockout a trunking frequency.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Frequencies tab, then click to highlight the frequency and click the L/O checkbox. Use the Clear L/O button to unlock all frequencies.
 
Mode (Site Frequencies) Allows you to set the receive mode for all trunking frequencies in the site.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Frequencies tab, then click drop-down next to Mode to select FM or NFM.
Use the Apply Mode to all Sites button as desired.
 
Trunking Tables (Site Options) (Motorola only) Allows you to select the default trunking table or to customize the tables for each type of system. Trunking tables are required so the scanner can correctly determine the voice channel frequencies. Trunking table information can usually be found in the Radio Reference Database.
For Motorola Analog Systems use the Default option for 800 MHz and 900 MHz Motorola trunked systems.
For Motorola Splinter Systems use the Splinter option (analog 800Mhz  systems with frequencies between 866-869 MHz [or rebanded 851-854 MHz] ending with 0 instead of 5 e.g. 852.1250, not 852.1375).
For Motorola Rebanded Systems you must select Custom and create a custom band plan. For Motorola 800 MHz rebanded table entries see this post.
For Motorola VHF and UHF Systems you must select Custom and create a custom band plan. You must program the applicable lo channel, hi channel, offset, base frequency, and step for the system. I have found an explanation at the Trunked Radio Systems User’s Page  that describes how to find some of this information. Look for 'Determining Base and Offset Frequencies for the BC245xlt' by John C. See also this post for UHF systems. Radio Reference.com also has an explanation. Inquire at Radio Reference.com Forums to find more information about specific systems.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Options tab, then click drop-down next to Type to select.
For custom tables select Custom then click the Edit button. Click to select and highlight each field to edit and click the OK button. Repeat for each table as needed.
Use the Apply to all Sites button as desired.
 

Contents

Type I/IIi Fleetmaps (Site Options) (Motorola only) Motorola Type I and Type IIi systems require you to program a fleet map. This allows you to receive the talkgroup IDs correctly. Trunking table information can usually be found in the Radio Reference Database. If you don’t know which fleet map to use, you can try a method I found at Radio Reference.com., Determining Type I Motorola Fleet Maps by Dave Goodson. If you know the fleet map by name, E1P1, E1P2, etc., I have listed 16 pre-set fleet maps so you can see the size codes.
  Note: If you select size code S-12, S-13, or S-14, these restrictions apply:
S-12 can only be assigned to blocks 0, 2, 4 or 6.
S-13 can only be assigned to blocks 0 and 4.
S-14 can only be assigned to block 0.
Since these size codes require multiple blocks, you will be prompted for the next available block. For example, if you assign Block 0 as S-12, the scanner prompts you for block 2, the next block available, instead of block 1. If you assign Block 0 as S-14, you would not see another prompt because S-14 uses all available blocks.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Options tab, then click drop-down next to Presets to select.
For custom fleetmaps select Custom then click the Edit button. Click the drop-down next to each block to edit and click the OK button. Repeat for each block as needed.
Use the Apply to all Sites button as desired.
 
Control Channel Type (Site Options) (EDACS only) Selects the type of EDACS site.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Options tab, then click drop-down next to Control Channel Type to select from the menu.
EDACS Standard (Wide) is the normal EDACS system on 800 MHz and some UHF systems.
EDACS Narrow is used on some UHF systems and most 900 MHz systems.
  Narrow Signal Type this setting inverts the incoming decoded control channel data. Some EDACS Narrow systems may require this setting in order to operate.
 
Automatically adjust home repeaters (Site Options) (LTR only) LTR systems require the frequencies be placed in Logical Channel Number order or LCN order. This option enables the scanner to automatically move the frequency to the correct home repeater location using information transmitted on the active frequency.
  Click to select the System then click the Site Details tab, click the Site to select, click the Site Options tab, then click drop-down next to Automatically adjust home repeaters to select On.

Program/Edit Frequencies and Talkgroup IDs Contents
You can edit some (not all) settings for objects imported from 'Browse Library' and 'Library Import' with the object menu in the scanner but you will need the software for the rest of the settings and to program new objects and trunking systems. All the settings for objects can be edited with the Conventional Frequencies tab and Talkgroup Details or Radio ID Details tab. The Playlists tab allows you organize play lists and view/edit some of the properties of those objects by play list and is an easy way to add single objects to each list.

To Edit Objects in the Scanner, from the main menu press or to scroll to 'Browse Objects' then press SEL or .
Use or to select the play list where the object is located. Press or to locate the object in the list.
Press MENU to enter the menu for the object.

You can also press Menu when the object is in the display in scan receive/pause modes.

You may also see:

    Store wildcard ID when
Menu is pressed in receive mode if a Wildcard ID is found in a trunked system.
    Store sq code
-
when Menu is pressed in receive mode if a CTCSS/DCS tone/code is found in tone/code search mode for a conventional object.

Use or to select each option below.
To save your changes press Menu then SEL to bring you back to the main menu.
You can also scroll back up to Save Changes and press SEL or to bring you back to the last menu.

 

Scanner Object Menu...

Alpha Tag Skipped Attenuate (conv only) Flash Pattern Off Time
Set Playlists Priority Alarm On Time Delete Object
Lock Out Delay Light    
 

To Program/Edit Conventional Objects select the Conventional Frequencies tab.
To Program/Edit Talkgroup Objects select the Trunked Radio Systems tab, click the system to highlight, then click the Talkgroup Details tab or Radio ID Details tab.
Not all tabs are visible by default. See Advanced Menu.
To Organize Play Lists select the Playlists tab.
To Select Multiple Objects for Settings use the shift-click or ctrl-click selection methods.

 

Conventional Frequencies Tab...

New (button) Frequency Pri Bklt Alert
Duplicate (button) Mode Att   Backlight Mode Playlists
Delete (button) Squelch ABst   Flash Pattern Import from Text File/Clipboard
Clear Skipped (button) L/O Dly   On Time, Off Time  
Alpha Tag Skip (Delay) Time      
           

Trunked Radio Systems Tab - Talkgroup Details, Radio ID Details...

New (button) Alpha Tag Bklt Dly Playlists
Delete (button) L/O   Flash Pattern (Delay) Time Import from Text File/Clipboard
Add Wildcard (button) Skip   On Time, Off Time Alert Show Unassigned Talkgroups
Clear Skipped (button) Pri        
Compress (button) ABst        
         

Playlists Tab...

Scanlist Delete Channel (button) L/O Bklt Dly
Enabled Clear Skipped (button) Skip   Backlight Mode Alert
New Channel (button) Alpha Tag Pri   Flash Pattern Playlists
Remove Channel (button)         On Time, Off Time  

New (Object) (button) Allows you create a new conventional or talkgroup object with the default settings in the Default Play List. Talkgroup IDs must be entered in the selected ID Format.

Contents

 
New Channel (button) Used to create new objects in the Playlists tab only.
Click anywhere on an object line to select where to insert the object then use the wizard to create an object. Talkgroup IDs must be entered in the selected ID Format.
 
Duplicate (Object) (button) (conventional only) Allows you to duplicate a conventional object in the same play list.
  Click anywhere on the object line to highlight then click the Duplicate button to the right.
 
Delete (Object) (button)/Delete Object This will delete the conventional object from all play lists or delete a talkgroup ID from the system.
  Scanner Press SEL or to delete.
Software Click anywhere on the object line to highlight then click the Delete button.
 
Add Wildcard (button) Allows you to add a wildcard ID that will receive all talkgroups (Talkgroup Details tab) or a wildcard ID that will receive all private IDs (Radio ID Details tab).
  Click the button to create the wildcard. Scroll to select and click the play list(s) you want the wildcard ID assigned to and click the Set button. Note: If a wildcard already exists the button will be grayed out.
 
Clear Skipped (button) Will clear all skipped objects.
 
Compress (button) This option will remove unused space in the data files for the currently selected system. The recovered space depends on the number of ID objects that have been deleted from that data file.
 
Alpha Tag Allows you to edit the tag for an object with up to 16 characters.
  Scanner Press SEL or to edit.
Press or to select the first character, then to move the cursor and repeat for each character.
Press SEL to save and exit.
Software Click anywhere on the object line to highlight then click the Alpha Tag field to edit and press enter to save.
 
Frequency (conventional only) (software only) Allows you to edit the frequency of a conventional object.
  Click anywhere on the object line to highlight then click the Frequency field to edit and press enter to save.
 
Mode (conventional only) (software only) Allows you to set the receive mode for a conventional object. Default is Auto.
  Click anywhere on the object line to highlight then click the Mode field to toggle Auto, FM, NFM, or AM.
 
Squelch (conventional only) (software only) Allows you to set the squelch mode for a conventional object. Default is Search.
  Click anywhere on the object line to highlight then click the Squelch field.
Select the Squelch Mode or Search for any mode with the drop-down arrow.
If CTCSS or DCS is chosen, click the Search for value box for any tone/code or select the Squelch Value from the drop-down and click Done.
To lockout a value check Exclude this value.
 

Contents

L/O/Locked Out Used for objects you will never want to scan (like encrypted talkgroups). The only way to unlock an object is in the object's menu (or software). Default is Off.

  Scanner Press SEL or to check On, or uncheck Off.
Software Click anywhere on the object line to highlight then click the L/O box.
 
Skip/Skipped Used for objects you want to temporarily lockout and unlock with Restore (all) Skipped in the main menu or Clear Skipped in the software. Default is Off.
  Scanner Press SEL or to check On, or uncheck Off.
Software Click anywhere on the object line to highlight then click the Skip box.
 
Pri/Priority Sets the object for priority. Priority Mode must also be checked in the main menu. Default is Off. See also Priority Time and Priority Scanning.
  Scanner Press SEL or to check On, or uncheck Off.
Software Click anywhere on the object line to highlight then click the Pri box.
 
Att/Attenuate (conventional only) Attenuates the conventional object (20db?).
Note: Global Attenuation Mode must be set to Normal for this setting to apply.
  Scanner Press SEL or to check On, or uncheck Off.
Software Click anywhere on the object line to highlight then click the Att box.
 
ABst (Audioboost) (software only) Boosts the audio slightly (6 dB?) for the object. Default is Off. See also System ABst.
Click anywhere on the object line to highlight then click the ABst box.
 
Dly/Delay Turns the delay on for the object according to the Delay Time. Default is On.
  Scanner Press SEL or to check On, or uncheck Off.
Software Click anywhere on the object line to highlight then click the Dly box.
 
(Delay) Time (software only) Sets the time for the object to pause after a transmission before continuing to scan. Default is 2 seconds.
  Click anywhere on the object line to highlight then click the Time field. Drag the slider to select the time. Tip: Use the left/right arrow buttons on your keyboard for better precision.
 
Backlight Mode/Light Sets backlight behavior when the object becomes active. Default is Leave.
  Leave - uses the LiteMode backlight setting.
On -
turns the backlight on when the object is active and Alerts is set to Both or Visual and LiteMode is set to Norml, Key Press/Key, or Ignor.
Flash -
flashes the backlight according to the Flash Pattern setting when the object is active and Alerts is set to Both or Visual and LiteMode is set to Norml, Key Press/Key, or Ignor.
LiteMode has to be set to Norml, Key Press/Key, or Ignre for the backlight to come on only during a transmission.
Scanner Press or to select Leave, On, or Flash.
Software Click anywhere on the object line to highlight then click the Bklt field to select.
Click the drop-down arrow at Backlight Mode to select
Leave, On, or Flash.
 
Flash Pattern Sets the flash pattern for the backlight when Light is set to Flash and Alerts is set to Both or Visual and LiteMode is set to On, Norml, Key/Key Press, or Ignor.
For more information see Flash Programming.
  Scanner Press SEL or to edit. The flash pattern is set for each block by specifying the number or letter associated with the desired flash pattern. Enter a sequence of 8 numbers and/or letters, 0-9 and A-F. Default pattern is 55555555.
Press or to select the first number/letter of the pattern code, then to move the cursor and repeat for the next numbers/letters.
Press SEL to save and exit.
Software Click anywhere on the object line to highlight then click the Bklt field to select.
Use the drop-down arrow to set Backlight Mode to Flash.
Enter the On Time and Off Time then check/uncheck the 32 boxes to select a pattern.
Each step in the 32 step flash pattern defines whether the backlight is on or off for the durations specified in the On Time and Off Time settings. You can also Load Presets that are included in the software or Save Presets with the buttons.
 

Contents

On Time Sets the time the backlight is on in the Flash Pattern when Light is set to Flash.
Off Time Sets the time the backlight is off in the Flash Pattern when Light is set to Flash.
  Scanner Press SEL or to edit. Enter the time, 1-100 (.01-1 seconds). Default is 50 (.5 second).
Press or to select the first number, then to move the cursor and repeat for each number.
Press SEL to save and exit.
Software Click anywhere on the object line to highlight then click the Bklt field to select.
Use the drop-down arrow to set Backlight Mode to Flash.
Enter the on time, 10-2500 (.01-2.5 seconds).
Default is 500 (.5 second).
 
Alert/Alarm Sets an audible alarm that is heard when the object becomes active. Default is Off. Note: Sounds must be On and Alerts must also be set to Audio or Both (in the Settings menu).
  Scanner Press or to preview and select the alarm.
Software Click anywhere on the object line to highlight then click the Alert field repeatedly to select.
 

Contents

Playlists/Set Playlists Allows you to assign the object to one or more play lists. Default is 1.

 

Scanner Press SEL or to edit.
Press or to select the list then press SEL to check On, or uncheck Off.
Press to save and exit.

Software Click anywhere on the object line to highlight then click the Playlists field.
Scroll to select and click the box next to one or more list(s) then press SET to assign.

 
Show Unassigned Talkgroups If checked will also show IDs that are not assigned to play lists.
Trunked Radio Systems tab > Talkgroup Details tab.
 
Scanlist Allow you to select a play list to edit.
Click the drop-down arrow and select a list.
 
Enabled Allow you to enable play lists for scanning
Click the drop-down arrow and select Yes for enabled or No for disabled.
 
Remove Channel (button) (Playlists tab) This will remove the object from the play list. It will not delete the object as it may still be a member of another play list. Talkgroup ID objects that have been removed from play lists will still be shown in the Talkgroup/Radio ID Details tabs with no play list assigned when Show Unassigned Talkgroups is checked.
Click to select the object then click the Remove Channel button.
 
Delete Channel (button) (Playlists tab) This will remove the object from all play lists and trunking systems.
Click to select the object then click the Remove Channel button.

Copy Programming To/From Scanner Contents
Turn off the scanner, remove the batteries and SD card. Insert the SD card into a card reader and plug the reader into a USB port on your computer running the software.
Open the iScan software and click on the 'SD Card' menu then 'Copy Configuration To SD Card' or 'Copy Configuration From SD Card'.
Note: When copying, the dialog boxes will be the same for copying to the SD card or copying to the iScan software.
Read the warning that states all coping will replace existing data and click Yes to continue.
Make sure the software has detected the correct drive, (or select the correct one with the drop-down arrow) and click the 'Continue' button.
Click 'OK' when done then unplug the scanner and turn it on.

Scanning Contents
To Start Scanning, from the main menu press or to scroll to 'Play' and press SEL or .
The display will show a scrolling arrow and the play list(s) names and will scroll the names if more than five play lists are enabled.
 
Turning Play Lists On/Off
To enable/disable a play list, from the main menu press or to scroll to 'Playlists' and press SEL or .
Use or to scroll to each play list and press SEL to enable (checked) or disable (unchecked).
Press to save and exit.
To use the Skywarn List press to enter weather scan then again to scan the list. SkyWarn will appear in the display.
 
Skipping Objects
To skip an object press the Skip button. This is not like a 'temporary lockout' that will restore all skipped objects when the scanner is power cycled. Skip is basically the same as lockout but allows you to 'unskip' all objects with 'Restore Skipped' (below).
 
Restore Skipped Objects
To restore all skipped objects, from the main menu press or to scroll to 'Restore Skipped' and press SEL or .
 
Storing CTCSS/DCS Tones/Codes
To store an ID found with a Wildcard ID press Menu when the object is displayed. Scroll to 'Store Wildcard' and press SEL. The ID will be assigned to the current play list (at the end of the list using 'Browse Objects').
To store a CTCSS/DCS tone/code (if enabled) press Menu when the object is displayed. Scroll to 'Store sq code' and press SEL.
 
Using Pause
Pause () will pause any scan or search and monitor that object. You will also see in the display. Press again to resume.
PAUSE pauses the scanner but keeps the scanner in scan mode.
If you press
while viewing a Wildcard ID, the scanner will monitor only the talkgroup the scanner is paused on.
 
Monitoring Objects

Contents

To monitor an object, from the main menu press or to scroll to 'Browse Objects' and press SEL or .
Pressing or will scroll through the play lists. Pressing or will scroll through objects in each play list.
When you have found the object press SEL.
If you monitor a Wildcard ID, the scanner will monitor all active IDs in that system.
 
Using the Attenuator
The attenuator reduces the amount of signal at the receiver input (20 dB?) and may help reduce interference from strong nearby transmitters. There are two attenuation modes, Normal and Global.
Normal attenuation uses the attenuation settings for each object/system/site/search.
Global attenuation forces attenuation for all objects/systems/sites/searches on or off.

To Attenuate a Conventional Object
press Menu anytime a conventional object is in the display. Use or to scroll to 'Attenuate' and press SEL or . Press to return to scanning.
To Attenuate
any Search press Menu in any search mode. Use or to scroll to 'Attenuate' and press SEL or . Press to return to searching.
 
Priority Scanning
Conventional Priority Scanning will give priority to conventional objects that have their priority mode set to 'On'. The scanner will sample the conventional objects for activity periodically while scanning and monitoring other objects. This sampling will cause a brief muting of received audio when it occurs while another object is active. The more conventional objects that are set for priority, the longer this audio muting will be, since it takes a certain amount of time to sample each priority conventional object for activity.

Talk Group Priority Scanning will give priority to IDs that have their priority mode set to 'On'. On some trunked systems (e.g. Mot 3600 if the system is programmed for it, and LTR for some talkgroups), it will look at low-speed data on the voice frequency checking for any priority Talk Group information.
It will not check for IDs when receiving any other talkgroup.
It will not check for IDs when scanning conventional objects.
Priority does work for Radio IDs associated with 'Private' IDs.
Priority does not work for Radio IDs associated with 'Group' IDs, the scanner will only check the 'Group' IDs.

To Turn Priority Scanning On from the main menu press or to scroll to 'Settings' and press SEL or .
Use or to scroll to 'Priority Mode' and press SEL or to enable (checked) or disable (unchecked).
All objects with their priority mode set to 'On' are given equal priority status. No object has higher priority over any another.

Setting the Priority Interval allows you to set how often your scanner will check for priority channels.
From the main menu press
or to scroll to 'Settings' and press SEL or .
Use or to scroll to 'Priority Time' and press SEL or to edit. Enter the amount of time, 1 - 25 (seconds).
Press or to select the first digit, then to move the cursor and select the second digit.

Optimizing Scanning Parameters Contents
Move your scanner/antenna to a different location. Sometimes just 12" helps.
Get a better antenna. The stock rubber duck is just average quality.
 
Conventional Scanning
Setting the squelch properly is the easiest and quickest way to receive channels better.
 
Analog Trunking
The one thing that frustrated me most with the default settings is the constant blinking of an ID in the display while the scanner was trying to lock on to it.
Here's what I did.

Move your scanner/antenna to a different location. Sometimes just turning it helps. You want that
in the upper left of the display to stay there as much as possible.
For Motorola systems/sites, only enter the known control channels/alternate control channels to speed up scanning. You don't need to program the voice channels.
There also are articles on
Object Oriented Scanners Overload Issues at Radio Reference.

Turning the squelch down a little will help pull in fringe sites. It will scan multiple sites slower but gives the scanner time to lock onto the control channels.
Turning the squelch up a little will find the stronger sites faster and therefore move to the next site/system quicker.

For Multi-site systems, program each site into its own play list first to see how well the site receives in different locations or conditions. This way you can see which sites are receivable by monitoring one play list at a time and looking for that little in the upper left of the display.

M
y personal experience has given me the best results by programming each site as one system and putting it in its own play list. I don't like putting all the sites for a Multi-site system into one system because it only monitors the 1 strongest control channel (site) which defeats the whole 'multi-site' concept IMHO. Yes, there may be different traffic on other receivable control channels you have in the system that aren't being monitored. You can still assign all those separate sites in the system to one play list to isolate the system if you prefer. This method will monitor all your control channels.

I would only program all sites into one system if there was only one control channel available at a time to monitor. This may be the case if you are located on the fringe of several weak sites. Set
Threshold Hi to around 85 and Threshold Lo to about 55 for a wider threshold range than the default 95 Hi and 75 Lo. You don't need 95% signal quality to lock on to a system. This will monitor the strongest control channel and look for another only when the signal strength falls below the 'Threshold Lo' setting.

These are just my suggestions. You will have to experiment with different ways to find what works best for you. Factors like how busy the multi-site system is, how much traffic you want to listen to on that system, if you are stationary or mobile, and how many other systems you want to listen to will determine the best way for you to setup each multi-site system.

Searching  
Public Safety, Air, or Ham Search Marine, CB, Rail, or FRS/GRMS/MURS Search Limit Search Zeromatic Tuning
Public Safety, Air, and Ham Search Group Charts Marine, CB, Rail, and FRS/GRMS/MURS Search Channels Signal Stalker Search Unlocking Search Frequencies
 

Public Safety, Air, or Ham Search

Contents

The scanner's Service search allows you to search commonly used public safety frequencies, civilian and military air frequencies, and amateur radio frequencies. Zeromatic tuning is a feature that enhances the scanner's ability to lock on to the actual center frequency of a search hit instead of an adjacent frequency. See also Flexstep setting for step size defaults.

To Start a Public Safety, Air, or Ham Search
from the main menu press or to scroll to 'Search' and press SEL or .
Use or to scroll to 'Service Search' and press SEL or . Use or to scroll to 'Public Safety', 'Aircraft' or 'Amateur' and press SEL or .
To change direction or resume searching press or .
To pause on a frequency press . To resume press again.
To store a frequency (to the Default Play List) press Menu when the frequency is displayed. Use or to scroll to 'Store Channel'.
To lockout a frequency press Skip.
To unlock a frequency see Unlocking Search Frequencies.
To select Groups, toggle Attenuation, Zeromatic Tuning, Rx Mode (Air/Amateur only), or Delay press Menu. Use or to scroll each option and press SEL or to enable (check) or disable (uncheck).
Use or to scroll to each selection and press SEL or to enable (checked) or disable (unchecked). Press to resume.
 

Public Safety, Air, and Ham Search Group Charts

Public Safety Groups

Band

Frequencies

Step (kHz)

Mode (fixed)

Public Safety

30.860,30.090-31.980
33.020-33.100,33.420-33.980
35.020,35.640-35.680
37.020-37.420,37.900-37.980
39.020-39.980,42.020-42.940
43.640-43.680,44.620-46.580
47.020-47.660

10
 

FM
 

Public Safety

150.775,150.7875,150.800,150.805
150.995,151.0025,151.010-151.4975
152.0075,153.740-154.4525
154.650-156.045,156.050
156.0525-156.1725,156.175
156.180-156.240,157.450
158.7225-159.4725,163.250
166.250,170.150,170.425
170.475,170.575,171.425
171.475,171.575,172.225
172.275,172.375,173.075

7.5

FM
 

173.2375-173.3625 12.5

Public Safety

453.0125-453.99375,458.0125-458.99375
460.0125-460.6375,460.64375
462.9375-463.19375
465.0125-465.64375
467.9375-468.19375

6.25
 

FM
 

Trunked Public Safety

764-781.996875,791-796.996875

3.125

FM

Trunked Public Safety

851.0125-860.9875,866.0125-868.9875

12.5

FM

Aircraft Groups

Band

Frequencies

Step (kHz)

Mode (fixed)

Navigation

108-117.991666

8.33

AM

Civilian Air

118-136.991666

8.33

AM

Military, Government

138-143.9875
148-150.7875

12.5

AM
FM

Commercial/Military Air

225-380

25

AM

Military Trunked 380-400

12.5

FM

Amateur Groups

Band

Frequencies

Step (kHz)

Mode (fixed)

10m

28-29.700

5

AM

6m

50-54

5

FM

2m

144-148

5

FM

1.25m

222-225

5

FM

70cm

420-450

5

FM

33cm

902-928

12.5

FM

23cm

1240-1300

6.25

FM

Marine, CB, Rail, or FRS/GRMS/MURS Search

Contents

The CB, Marine, and FRS/GMRS/MURS bands are actually frequencies pre-programmed into special channels. You are not searching from a lower frequency to a higher frequency. There are 40 CB channels, 60 Marine channels, 96 Rail channels, and 34 FRS/GMRS/MURS channels.

 
To Start a Marine, CB, Rail, or FRS/GRMS/MURS Search from the main menu press or to scroll to 'Search' and press SEL or .
Use or to scroll to 'Service Search' and press SEL or . Use or to scroll to 'Marine', 'CB', 'Rail', or 'FRS/GMRS/MURS' and press SEL or .
To change direction or resume searching press or .
To pause on a channel press . To resume press again.
To store a channel (to the Default Play List) press Menu when the channel is displayed.
To lockout a channel press Skip.
To unlock a channel press Menu. Use or to scroll to the channel and press SEL or to unlock (unchecked).
To toggle Attenuation, or Delay press Menu. Use or to scroll each option and press SEL or to enable (check) or disable (uncheck).
Use or to scroll to each selection and press SEL or to enable (checked) or disable (unchecked). Press to resume.
 

Marine, CB, Rail, and FRS/GRMS/MURS Search Channel Charts

Contents

 
Marine band Receive mode: FM
Ch. Frequency Ch. Frequency Ch. Frequency Ch. Frequency
1 156.050 19 156.950 28 162.000 78 156.925
5 156.250 20 157.000 63 156.175 79 156.975
6 156.300 20 161.600 64 156.225 80 157.025
7 156.350 21 157.050 64 160.825 81 157.075
8 156.400 22 157.100 65 156.275 82 157.125
9 156.450 23 157.150 66 156.325 83 157.175
10 156.500 24 157.200 67 156.375 84 157.225
11 156.550 24 161.800 68 156.425 84 161.825
12 156.600 25 157.250 69 156.475 85 157.275
13 156.650 25 161.850 70 156.525 85 161.875
14 156.700 26 157.300 71 156.575 86 157.325
15 156.750 26 161.900 72 156.625 86 161.925
16 156.800 27 157.350 73 156.675 87 157.375
17 156.850 27 161.950 74 156.725 87 161.975
18 156.900 28 157.400 77 156.875 88 157.425
 

Railroad Receive mode: FM

Channels

Frequency

Step (kHz)
2-4

159.810,159.930,160.050

 
5-97

160.185-161.565

15
CB band Receive mode: AM
Ch. Frequency Ch. Frequency
1 26.965 21 27.215
2 26.975 22 27.225
3 26.985 23 27.255
4 27.005 24 27.235
5 27.015 25 27.245
6 27.025 26 27.265
7 27.035 27 27.275
8 27.055 28 27.285
9 27.065 29 27.295
10 27.075 30 27.305
11 27.085 31 27.315
12 27.105 32 27.325
13 27.115 33 27.335
14 27.125 34 27.345
15 27.135 35 27.355
16 27.155 36 27.365
17 27.165 37 27.375
18 27.175 38 27.385
19 27.185 39 27.395
20 27.205 40 27.405
FRS/GMRS/MURS  Receive mode: FM
Ch. Frequency Ch. Frequency
1 462.5625 18 462.625
2 462.5875 19 462.650
3 462.6125 20 462.675
4 462.6375 21 462.700
5 462.6625 22 462.725
6 462.6875 23 151.820
7 462.7125 24 151.880
8 467.5625 25 151.940
9 467.5875 26 154.570
10 467.6125 27 154.600
11 467.6375 28 151.625
12 467.6625 29 464.500
13 467.6875 30 464.550
14 467.7125 31 467.850
15 462.550 32 467.875
16 462.575 33 467.900
17 462.600 34 467.925

Limit Search Contents
The scanner's Limit search allows you to program and search a range of upper and lower frequencies. See also Flexstep setting for step size defaults.
 
To Start a Limit Search from the main menu press or to scroll to 'Search' and press SEL or .
Use or to scroll to 'Limit Search' and press SEL or .
To change the lower and upper frequencies press Menu. Use or to scroll to 'Lo:' and press SEL or to edit.
Press or to select the first digit, then to move the cursor and select the next digit and repeat to set. Press SEL to save and exit.
Press to scroll to 'Hi:' and repeat to edit. Press SEL to save and exit.
To change direction or resume searching press or .
To pause on a frequency press . To resume press again.
To store a frequency (to the Default Play List) press Menu when the frequency is displayed. Use or to scroll to 'Store Channel'.
To lockout a frequency press Skip.
To unlock a frequency see Unlocking Search Frequencies.
To toggle Attenuation, Zeromatic Tuning, or Delay press Menu. Use or to scroll each option and press SEL or to enable (check) or disable (uncheck).
Use or to scroll to each selection and press SEL or to enable (checked) or disable (unchecked). Press to resume.

Signal Stalker Search Contents
Your scanner's Signal Stalker feature provides a powerful new tool for you to rapidly detect, monitor, and store frequencies from nearby radio transmissions. You can scan all of the bands the scanner receives or just public safety bands. Signal Stalker is more sensitive than portable frequency counters and will detect transmissions at a greater distance. Signal Stalker functions by rapidly searching through the RF spectrum in 1 MHz segments. If RF signal energy is detected in a 1 MHz segment, the scanner will search through the 1MHz segment in finer steps until the source of the signal is found. Signal Stalker allows you to search the entire range of your scanner's design frequencies, or you can specify just those frequency ranges that you wish to search. See also Flexstep setting for step size defaults.

Special Signal Stalker
If a 1 MHz sweep indicates that activity is present, Special Signal Stalker searches the whole 1 MHz range to find the source. If you lockout 5 frequencies within a 1 MHz segment, the scanner will skip that entire segment in subsequent searches.
 
To Start a Signal Stalker Search from the main menu press or to scroll to 'Search' and press SEL or .
Use or to scroll to 'Spectrum Sweepr' and press SEL or . Use or to scroll to 'All Bands', or 'Public Safety' and press SEL or .
To change direction or resume searching press or .
To pause on a frequency press . To resume press again.
To store a frequency (to the Default Play List) press Menu when the frequency is displayed. Use or to scroll to 'Store Channel'.
To lockout a frequency press Skip.
To unlock a frequency see Unlocking Search Frequencies.
To select Bands, toggle Special Mode, Attenuation, Zeromatic Tuning, or Delay press Menu. Use or to scroll each option and press SEL or to enable (check) or disable (uncheck).
Use or to scroll to each selection and press SEL or to enable (checked) or disable (unchecked). Press to resume.
All Stalker Bands
Band Frequencies Mode
CB, 10m/6m Ham 25-54 Auto
VHF Air 108-137 Auto
2m Ham, PS, Rail 137-174 Auto
Commercial Air,1.25m Amateur 216-300 Auto
Military Air 300-406 Auto
70cm Ham, PS 406-470 Auto
UHF TV 470-512 Auto
Trunked Public Safety 764-782 Auto
Trunked Public Safety 791-797 Auto
Trunked Public Safety 806-869 Auto
33/23cm Ham 894-960,1240-1300 Auto
Public Safety Bands
Band Frequencies Mode
Public Safety 33.400-46.500 Auto
Public Safety 151-170 Auto
Public Safety 453-467 Auto
Trunked Public Safety 764-782 Auto
Trunked Public Safety 791-797 Auto
Trunked Public Safety 806-869 Auto

Zeromatic Tuning  
Zeromatic tuning is a feature that enhances the scanner's ability to lock on to the actual center frequency of a search hit instead of an adjacent frequency. This option is available for all Limit, Service, and Stalker search objects and dedicated searches except CB, Marine, and F/G/MURS.
To toggle Zeromatic Tuning, from each search menu use or to scroll to 'Zeromatic' and press SEL or to enable (check) or disable (uncheck).

 

Unlocking Search Frequencies  
To unlock a frequency, from the main menu press or to scroll to 'Search' and press SEL or .
Use or to scroll to 'Lockouts' and press SEL or . Use or to scroll to each frequency and press SEL or to check. Press to save and exit.

Weather Settings Contents

 You can monitor NOAA weather radio broadcasts, you can use the weather priority feature while scanning to alert you to severe weather broadcasts as they occur, or you can use the SAME alert mode where the scanner monitors specific geographic area(s) and/or weather events.

 

Weather Radio
Weather radio mode allows you to receive weather broadcasts from your local weather service.

 

To hear your local weather channel press . If it is a weak signal, press or to find a stronger channel number.
To attenuate a weather channel press Menu and use or to scroll to 'Atten Ch #' and press SEL or to attenuate the channel. Press to save and exit.
If you can hear multiple weather transmitters from your location, attenuating weaker channels can help ensure you receive the transmitter closest to you.
To exit weather radio press SEL for Scan mode or Menu twice for the main menu.

 
Skywarn List
The Skywarn List is a list that can be scanned independently from the regular 50 lists. It scans the objects in that list only and no other lists. It is provided to program Skywarn or other related weather frequencies for quick access but can be programmed as a quick list for any type of frequencies. The Skywarn List is play list #51 when selecting lists in the menus. Objects in the Skywarn list can also be assigned to one or more of the main 50 lists.

To Scan the Skywarn List press to enter weather scan mode then again to scan the list. Press SCAN to exit.
 

Weather Priority
Weather Priority mode samples a selected weather frequency periodically while scanning to see if an alert is present. If one is present, the scanner will sound an alarm and tune to the weather frequency to monitor the alert.
The
Weather Priority Check Interval setting in the software (below) allows you to set the interval time to check for an alarm while scanning.
 

Scanner To Turn on Weather Priority press to enter weather radio and note which channel number is receiving the strongest.

 

Press Menu and use or to scroll to 'Priority' and press to select the weather channel number noted as the strongest.
The weather channel is now set as priority when scanning. Note: There is no indicator in the display to show weather priority is active.
To Turn off Weather Priority press Menu and use or to scroll to 'Priority' and press to select Off.
Press Menu to save and exit.

Software To Turn Weather Priority on or off select the Weather tab in the software. Click to select/deselect the priority checkbox for the channel you want to use for priority.
  To Set the Priority Interval enter the time in seconds. Setting the check interval higher than 8 seconds may cause the scanner to miss the alert tone.

 

Contents

SAME Standby Mode

SAME Standby Mode monitors the specified weather frequency silently, waiting to receive a Specific Area Message Encoding (SAME) alert that corresponds with up to 10 SAME location code(s) and event code(s) that you have programmed. If there is a match between a sent SAME location code/event code and one that you have programmed, the scanner will sound an alarm, display the alert type, and monitor the alert. To activate SAME Standby Mode for your area, you should provide at least one SAME location code for your city, county or state. You may wish to enter additional codes for surrounding areas so that you can receive advance warning of adverse or dangerous weather that may be headed in your direction. By default, SAME mode will alert on any SAME message received if no SAME location codes are programmed.

The NWS has divided the United States into regions by state and county (or parish, where applicable) then assigned a 6-digit FIPS code to identify each county or parish. For example, the code for Tarrant County, Texas, is 048439. The first digit in a FIPS code identifies the county subdivision, the next two digits identify the state, and the last three digits identify the county or parish. Most FIPS codes begin with 0, which means the code represents an entire county. The NWS, however, plans to eventually subdivide some large counties. When that happens, each subdivision will be assigned a digit from 1-9, resulting in codes such as 148439, 248439, and so on.

FIPS (SAME) codes are in the format nSSCCC:
n: A special subcounty designator. For an entire county, use 0.
SS: The state code.
CCC: The county code.

Each SAME location and event code can be set to 'ON' (enabled) or 'OFF' and the lockout set to 'ON' or 'OFF'. The lockout feature allows you to enter and lockout certain event codes like the weekly test event code and still here other event codes with one or more location codes. To obtain the FIPS (SAME) codes call the NWS toll free at 1-888-697-7263 (follow the instructions you hear) or see FIP codes for the United States and its Possessions.

Event Codes Event codes are just different types of warnings. These scanners will allow to program specific alert event codes or a wildcard code (that will receive any event) and/or lock them out so you can monitor just the events you want to hear. A list of event codes can be found here.

 

Scanner To Program SAME Location Names press to enter weather radio then press Menu to enter the weather menu.

 

Use or to scroll to 'SAME # Tag' and press SEL or to tag the location.
Press or to select the first character, then to move the cursor and repeat for each character. Press SEL to save and exit.
To Program SAME FIP Codes use or to scroll to 'SAME # FIP' and press SEL or to the location code.
Press or to select the first number, then to move the cursor and repeat for each number. Press SEL to save and exit.
To Enable SAME FIP Locations use or to scroll to 'SAME # Enable' and press SEL or to enable the location.
Repeat for each SAME location as desired.

To Toggle SAME Standby Mode On or Off press to enter weather radio then press Skip. Press Skip again to exit.
 

Software To Program SAME Location Names click to select and highlight the Alpha Tag field to edit.
  To Program SAME FIP Codes click to select and highlight the FIP field to edit.
To Program an Event Code click to select the Event field and select the event type from the drop-down list.
To Lockout an Event Code click to select the Event field and select the event type from the drop-down list then click the lockout button.
To Enable SAME FIP Locations click to check the Enable checkbox.
To Select the Alert Type click to select the Alert Type field and select the alert from the drop-down list.
The Alert Tone Timeout will sound the alert for the number of seconds selected. If set to 0 the scanner will wait for a key press to silence.
The Audio Monitor Duration time is how long the scanner will monitor the weather channel after the alert tone has timed out.

Reformatting the SD Card Contents
The SD card comes formatted for the standard FAT file system with a cluster size of 32kB (Note that this is not the same as the 'FAT32' file system). The scanner will work best if the supplied 2GB SD card is formatted for the standard FAT file system with a cluster size of 32kB. Formatting the SD card for other file system types may cause the scanner to malfunction.

When using other SD cards the following formatting guidelines should be used:
Any card with 2GB or less capacity must be formatted using the FAT file system with a cluster size of 32kB.
Any card with greater than 2GB must be formatted using the FAT32 file system with a cluster size of 32kB.

Open the iScan software and click on the 'SD Card' menu then 'Prepare SD Card for use'. Make sure the software has detected the correct drive to format (or select the correct one with the drop-down arrow) and click the 'Format' button.
You also need to check 'Copy Library files to SD card after format' or the scanner will not power on correctly. If you have a configuration in the software you can copy to the SD card, also check 'Copy current configuration data to SD card after format'.

Note: Do not uncheck the 'Quick Format' box.

LED Flash Programming Contents

Each Object uses a 32 step Flash Pattern. Each step in the 32 step flash pattern defines whether the backlight/LED is on or off for the durations specified in the On Time and Off Time settings below. The pattern consists of eight blocks with four steps for each block. There are 16 possible flash patterns for each of the 8 blocks.

 

To Set the Flash Pattern in the Scanner, each of the possible 16 patterns within a four step block is defined using the characters 0-9 and A-F.
Each block translates to a number or letter to program into each of the 8 Flash Pattern fields in the scanner.
'On Time' and 'Off Time' are specified in 10 millisecond increments in the scanner. 'On Time of 50' means the light will come on for 500 milliseconds (or one half second).

Pattern 4-Step Block

0

off

off

off

off

1

off

off

off

on

2

off

off

on

off

3

off

off

on

on

4

off

on

off

off

5

off

on

off

on

6

off

on

on

off

7

off

on

on

on

Pattern 4-Step Block

8

on

off

off

off

9

on

off

off

on

A

on

off

on

off

B

on

off

on

on

C

on

on

off

off

D

on

on

off

on

E

on

on

on

off

F

on

on

on

on

 

Example, the default pattern:55555555, On Time: 50, Off Time: 50

Block 1

Block 2

5

5

off

on

off

on

off

on

off

on

Block 5

Block 6

5

5

off

on

off

on

off

on

off

on

Block 3

Block 4

5

5

off

on

off

on

off

on

off

on

Block 7

Block 8

5

5

off

on

off

on

off

on

off

on

The backlight (or Alert LED) will flash on and off at a rate of one flash per second, with each flash lasting half a second.

 

To Set the Flash Pattern in the Software, each of the 16 possible patterns within a four step block is defined using checked boxes.
For each checked box, the backlight will be on for the time set in 'On Time' and for each unchecked box the backlight will be off for the time set in 'Off Time'.
'On Time' and 'Off Time' are specified in millisecond increments in the software. 'On Time of 500' means the light will come on for 500 milliseconds (or one half second).

Firmware/CPU/Library/Software Version Contents

To view the CPU and Library version in the scanner power on the scanner and press Menu when the welcome screen appears.

To view the Library version in the software click the Updates menu and click 'Check for Library Update'. Clicking the 'Check for Updates' button will show the current library version.

To view the software version click the Help menu and click 'About...'.

Charging the Batteries  

To charge the batteries connect the supplied USB cable to the scanner (powered on or off) and any USB port. You will see the battery icon display empty to full until charging is done then in the display. The battery charger charges at a current rate of 150 mA. It will reset every time you connect the scanner to the USB cable.
Note: an external charger is strongly recommended.

WARNING:! ALKALINE BATTERIES CANNOT BE RECHARGED. Never operate the scanner with alkaline batteries if the Battery Type Selection switch is set to the NiMH position.

Related Links Contents
Finding EDACS LCN order - I have found a procedure at the Trunked Radio Systems User’s Page which explains how to find the LCN order for an EDACS system if you don't know the order. Look for 'Finding EDACS Logical Channel Numbers' by Todd Hartzel near the bottom of the page.
 
Determining Type I Motorola Fleetmaps - You can try a method I found at Radio Reference.com. Determining Type I Motorola Fleet Maps.by Dave Goodson.
 
Determining Base/Step/Offset for VHF/UHF Motorola Systems - I have found an explanation at Radio Reference.com that describes how to do this if you don't have the information. The Trunked Radio Systems User’s Page also has an explanation. Look for 'Determining Base and Offset Frequencies for the BC245xlt' by John C.
 
Decimal/AFS Conversion Chart - Here is a Conversion Chart to help convert your IDs.
 
How to view these pages in your browsers
I have formatted these pages so that you can view them with any monitor, in any browser (Foxfire, Opera, I.E., or Netscape), at any zoom level, and in any screen area size (ex: 600x800)-small or large fonts. So if the print is too small, go to the 'view' menu in your browser and adjust it to a bigger level (or smaller if you want to see more on the screen).
 
Newsgroups and Forums
Yahoo Groups-PRO-107 Radio Reference Forums
Radio Reference Radio Radio Shack Scanners Forum  
 
Links
Radio Reference Pro-107 Wiki Radio Reference.com
Radio Reference Data Base eHam.net-reviews

Click here to visit Scanner Master

Preset Fleet Maps Contents
In Motorola II systems (no programming the fleet map required), all the blocks have size code, S0, which has a size limitation of 512 radios. In Type I systems, size codes are used in different blocks to denote the maximum number of users in that block. Notice that size code S-12 uses 2 blocks. A Motorola Hybrid system (Type IIi) has 'blocks' of the system that are Type I Fleets/Subfleets and Type II talkgroups. The maps that are Hybrid systems are in bold.
E1P1 E1P2 E1P3 E1P4 E1P5 E1P6 E1P7 E1P8
Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code
0 S-11 0 S-4 0 S-4 0 S-12 0 S-4 0 S-3 0 S-10 0 S-1
1 S-11 1 S-4 1 S-4 1 (S-12) 1 S-4 1 S-4 1 S-10 1 S-1
2 S-11 2 S-4 2 S-4 2 S-4 2 S-12 2 S-4 2 S-11 2 S-2
3 S-11 3 S-4 3 S-4 3 S-4 3 (S-12) 3 S-4 3 S-4 3 S-2
4 S-11 4 S-4 4 S-4 4 S-4 4 S-4 4 S-12 4 S-4 4 S-3
5 S-11 5 S-4 5 S-4 5 S-4 5 S-4 5 (S-12) 5 S-4 5 S-3
6 S-11 6 S-4 6 S-12 6 S-4 6 S-4 6 S-12 6 S-4 6 S-4
7 S-11 7 S-4 7 (S-12) 7 S-4 7 S-4 7 (S-12) 7 S-4 7 S-4
 
E1P9 E1P10 E1P11 E1P12 E1P13 E1P14 E1P15 E1P16
Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code Block Size Code
0 S-4 0 S-0 0 S-4 0 S-0 0 S-3 0 S-4 0 S-4 0 S-3
1 S-4 1 S-0 1 S-0 1 S-0 1 S-3 1 S-3 1 S-4 1 S-10
2 S-0 2 S-0 2 S-0 2 S-0 2 S-11 2 S-10 2 S-4 2 S-10
3 S-0 3 S-0 3 S-0 3 S-0 3 S-4 3 S-4 3 S-11 3 S-11
4 S-0 4 S-0 4 S-0 4 S-0 4 S-4 4 S-4 4 S-11 4 S-0
5 S-0 5 S-0 5 S-0 5 S-0 5 S-0 5 S-4 5 S-0 5 S-0
6 S-0 6 S-4 6 S-0 6 S-0 6 S-0 6 S-12 6 S-12 6 S-12
7 S-0 7 S-4 7 S-0 7 S-4 7 S-0 7 (S-12) 7 (S-12) 7 (S-12)
 
Size Code Fleets Sub Fleets Number of Blocks Number of Talkgroups per Block Max IDs per Talkgroup Max Radios per Block
S0 N/A N/A N/A N/A N/A 512?
S1 128 4 1 512 16 16
S2 16 8 1 128 64 64
S3 8 8 1 64 128 128
S4 1 16 1 16 512 512
S5 64 4 1 256 32 32
S6 32 8 1 256 32 32
S7 32 4 1 128 64 64
S8 16 4 1 64 128 128
S9 8 4 1 32 256 256
S10 4 8 1 32 256 256
S11 2 16 1 32 256 256
S12 1 16 2 8 1024 512
S13 1 16 4 4 2048 512
S14 1 16 8 2 4096 512
 
You can tell which block a Motorola ID is in by its number.
Block Lower ID# Upper ID#
0 0000 8191
1 8192 16383
2 16384 24575
3 24576 32767
4 32768 40959
5 40960 49151
6 49152 57343
7 57344 65535

Thanks to
Radio Reference.com for most of this information.

Contents
 
Home
Last updated
March 06, 2016

 

web counter
web counter